jrm67
Newbie
How do you set the sag on the 2010 Vector?I've read about measuring the 40-45 mm but that must be for a different style shock? I have the cam adjustment type set on the softest setting and it still doesn't sag much. I weigh around 185 w/gear. What do you measure? And how do you adjust it?
markshop
Veteran
I dont bother measuring at the shock. Just aim for about 4 inces of seat sag.
oldyami
Newbie
- Joined
- Jan 25, 2010
- Messages
- 17
Where do you measure 4'' of seat sag?At what point on the sled?
Lift the rear of the sled and set it down slowly so as to not compress the susp. If you are doing this alone, slide the plastic washer down to the shock body, then get on the sled sit down and then get off and check how far the washer slid up the shock rod to get your 40 to 45 mm.
