2011 RTX riser suggestions

[Yamahnator]

Hello all, I'm back into the game. Still looking for another sled but picked up a phazer that I found in good shape. I'm 6'2" so I need to raise it a bit. Any suggestions? I've looked but there's a lot of old info and links that no longer work.

 

[Cubby]

I installed a 2" ROX pivoting riser. I think that is the most you can do without extending the brake and throttle cable. Been on the the sled for 8 years no issues, You do have to route the throttle cable under the bars.

2" Pivoting Bar Risers for 7/8" Handlebar- Silver and Black colors

Lifetime Warranty Made in the USA 2" (51mm) Center-to-Center Rise Pivots Backward/Forward based on Rider Preference 7/8" Stem (22mm) Accepts 7/8" Handlebar (22mm) These risers will mount on virtually any machine that has a solid 7/8" tubular handlebar and open mounting area. NOT APPROVED for use...

roxspeedfx.com

 

[Yamahnator]

I installed a 2" ROX pivoting riser. I think that is the most you can do without extending the brake and throttle cable. Been on the the sled for 8 years no issues, You do have to route the throttle cable under the bars.

2" Pivoting Bar Risers for 7/8" Handlebar- Silver and Black colors

Lifetime Warranty Made in the USA 2" (51mm) Center-to-Center Rise Pivots Backward/Forward based on Rider Preference 7/8" Stem (22mm) Accepts 7/8" Handlebar (22mm) These risers will mount on virtually any machine that has a solid 7/8" tubular handlebar and open mounting area. NOT APPROVED for use...

roxspeedfx.com

I for some reason thought you could get 4 inches on stock cables.

 

[Cubby]

Its pretty tight with the 2".