sparks49
Extreme
My wife's 2014 Vector darts like crazy. I've made multiple adjustments to the rear suspension, adjusted the front springs, set the toe-in to 0 degrees, changed to front wear bars to 4" carbides on the inside and hard bars on the outside, all to no avail. My next thought was to go back to a single keel ski with Dooley's. We don't run picks on the sled. My question is, will this help solve the darting problem and what factory skis fit this sled? I have a couple of 2006 Vectors and was thinking of trying a swap, but don't know if it'll work. Any thoughts out there? Thanks.

kviper
VIP Member
- Joined
- Nov 7, 2003
- Messages
- 2,466
- Reaction score
- 279
- Points
- 1,453
- Location
- Oakfield WI
- Country
- USA
- Snowmobile
- 2012 MCX Turbo Apex
SnowTrackers with toe at 0. 100% fixed!
Fazed
Newbie
- Joined
- Mar 18, 2018
- Messages
- 4
- Reaction score
- 0
- Points
- 61
- Location
- Nova Scotia
- Country
- Canada
- Snowmobile
- 2013 Vector LTX
X2 on the Snow Trackers. On that year of ski/sled the semi aggressives are reported to work best.
sparks49
Extreme
Thanks guy's, that's the info I was looking for. Really appreciate it.
Banjo Man
Veteran
- Joined
- Nov 5, 2012
- Messages
- 31
- Reaction score
- 6
- Points
- 708
- Location
- Lake Barrington Il.
- Country
- USA
- Snowmobile
- 06 Vector GT. 15 Vector Ltx . 14 Vector Ltx
I have a 2015 LTX and put on single keel skis from an 06 with semi aggressive snowtrackers and works really well. I just never liked the tuners.


- Joined
- Jun 1, 2004
- Messages
- 7,866
- Reaction score
- 2,053
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
all the old yamaha single keel skis bolt up. i am running 09 mtx skis on both the 11 and 16 apex xtx.
TRUE BLUE SINCE 1980
Expert
- Joined
- Apr 11, 2010
- Messages
- 349
- Reaction score
- 45
- Points
- 738
- Location
- Central PA
- Country
- USA
- Snowmobile
- '10 VECTOR LTX
Cheep fix may be shimming the ski rubber at the back.
This will lift the ski tips up. We also weld and bolt a steel
"Smasher Plate" before the wear rod.
On the single keel ski ,works for us
This will lift the ski tips up. We also weld and bolt a steel
"Smasher Plate" before the wear rod.
On the single keel ski ,works for us
Last edited:
Similar threads
- Replies
- 11
- Views
- 3K