sparks49
Extreme
My wife's 2014 Vector darts like crazy. I've made multiple adjustments to the rear suspension, adjusted the front springs, set the toe-in to 0 degrees, changed to front wear bars to 4" carbides on the inside and hard bars on the outside, all to no avail. My next thought was to go back to a single keel ski with Dooley's. We don't run picks on the sled. My question is, will this help solve the darting problem and what factory skis fit this sled? I have a couple of 2006 Vectors and was thinking of trying a swap, but don't know if it'll work. Any thoughts out there? Thanks.
kviper
VIP Member
SnowTrackers with toe at 0. 100% fixed!
Fazed
Newbie
X2 on the Snow Trackers. On that year of ski/sled the semi aggressives are reported to work best.
sparks49
Extreme
Thanks guy's, that's the info I was looking for. Really appreciate it.
Banjo Man
Veteran
- Joined
- Nov 5, 2012
- Messages
- 31
- Location
- Lake Barrington Il.
- Country
- USA
- Snowmobile
- 06 Vector GT. 15 Vector Ltx . 14 Vector Ltx
I have a 2015 LTX and put on single keel skis from an 06 with semi aggressive snowtrackers and works really well. I just never liked the tuners.
- Joined
- Jun 1, 2004
- Messages
- 7,728
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
all the old yamaha single keel skis bolt up. i am running 09 mtx skis on both the 11 and 16 apex xtx.
TRUE BLUE SINCE 1980
Expert
Cheep fix may be shimming the ski rubber at the back.
This will lift the ski tips up. We also weld and bolt a steel
"Smasher Plate" before the wear rod.
On the single keel ski ,works for us
This will lift the ski tips up. We also weld and bolt a steel
"Smasher Plate" before the wear rod.
On the single keel ski ,works for us
Last edited:
Similar threads
- Replies
- 21
- Views
- 5K
- Replies
- 2
- Views
- 2K
- Replies
- 169
- Views
- 20K
- Replies
- 33
- Views
- 4K