Adams574
Extreme
- Joined
- Jul 2, 2014
- Messages
- 60
- Reaction score
- 28
- Points
- 123
- Country
- USA
- Snowmobile
- 2015 Viper LE Mpi turbo 162
2012 Nytro MTX 153
2009 Nytro XTX 144
Previous
2009 Summit 800
2008 Summit X 800
2007 Apex warrior
2007 Summit 800
2006 Summit 600
2006 MXZ Renagade 600
2004 RX-1 Mountian
2002 RMK 800
1996 ZR 580
1988 Cougar 500
1985 kitty cat
I went with the aem afr guage it runs the newer Bosch sensor that requires no tuning. My boost guage is an Autometer -30/+20. Don't like it because it's so small of a sweep in the guage so I orderd the 0-15 from autometer. My sleds low boost 6psi and the sleds don't pull vacume so you don't need a negative reding.
nitris223
TY 4 Stroke Junkie
- Joined
- Nov 18, 2012
- Messages
- 589
- Reaction score
- 32
- Points
- 778
- Location
- Yorkton Saskatchewan
- Country
- Canada
- Snowmobile
- Yamaha Nytro MTX
They will show a vacuum but a gauge with it is not needed on a gas engine, only diesel's. I ended up getting a set of Innovate gauges , both digital and they come with the new 4.9 sensor I think it is. Also snagged a set of Stewart Warner 0-15 psi analog gauges , 1 black face and 1 white face, couldn't decide on what face would work better on the sled. I am going white and I will sell the black face gauge to a buddy. I am going to play around with having both boost gauges on the one side and see what I like better digital or analog and see if both are accurate.
