87gtNOS
VIP Member
- Joined
- Nov 30, 2005
- Messages
- 1,892
- Age
- 50
- Location
- Toronto
- Country
- Canada
- Snowmobile
- 12 Apex XTX MCX powered
Track selection for 144's is getting rarer....
Who's got ideas?
Currently running Hacksaw 144x14x1. Hard to get. Trying to avoid Ripsaw 144x15x1.25 or the icerippers.
Who's got ideas?
Currently running Hacksaw 144x14x1. Hard to get. Trying to avoid Ripsaw 144x15x1.25 or the icerippers.
kinger
VIP Member
Crossover track is amazing. 1.5" is no big deal for trails at least on my ZX2 rear suspension. The winder has a 1.75 in same conditions and works good. I also do not like the Ripsaw.
Brotherdan
Expert
- Joined
- Sep 8, 2017
- Messages
- 361
- Age
- 52
- Location
- Belmont,maine
- Country
- USA
- Snowmobile
- 2011 apex xtx blue, starr suspension,gytr front shocks,camso 1.5 track cut down, snowtrackers work in process,2003 rx1er originally 121 converted to 136"monoshock 2 ck136 rear suspension with clicker vector ltx shock,muffin works tunnel extension, seat concepts(wrp) seat,apex hooked handlebars converted to all underhood wiring,8"lake effect billet aluminum riser,gytr frontshocks,yamaheater hand warmer kit,rocks ridelite,rocks power supply, rocks heated bag,, tunnel braces,blue skid plate,garmin gps, aggressive snowtrackers on apex single keel skis,rollerski ski wheel kit,108 warthog studs&blue studboy backers,pioneer wheel lowering kit, dupont slides, 4th wheel kit,yamaha saddle, tank& windshield bags, powermadd led handguards, bar mount mirror kit, apex radiator& electric fan added, apex rear cooler,autometer temp guage, apex new style large diameter drive shaft with extroverts machined for chaincase,thunder products clutching,1987 enticer 340ltr 2100miles,1984 enticer 340,1996 wolverine 350,big wheel kit,winch,racks,k&n,full skidplates
Maybe look into composit they offer 1.38 to 1.77 lug height, Pricing is very attractive
- Joined
- Jun 28, 2004
- Messages
- 2,436
- Age
- 64
- Location
- Clinton, Wi.
- Country
- USA
- Snowmobile
- '11 Apex XTX, '09 Venture GT, '06 Attak, 08 Nytro Hybrid
I've got MAJOR miles on 2 different sleds with the Crossover 1.5. When we installed the Airwave M20 in my XTX I went with the 136 Intense 1.5. My personal opinion is the 1.5 lug is optimal if you don't run studs. Closing in on 20,000 + miles with a 1.5. I have a Nytro with the Backcountry 1.75 and it's a riot in loose snow conditions, or when it's rutted up. Smell hyfax when it's cold flat and packed. Scratchers would likely help, just don't have set to put on.
- Joined
- Jun 1, 2004
- Messages
- 7,736
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
well, ran the 1-1/4" ripsaw on the 11 xtx for 15000 mi. put the 1-1/2" composit on it last winter and the few times i did ride it, it was a vast improvement in traction. i do run scratchers and duponts on that sled as care_bear runs it most of the time and she is not up on slider plastic smells when they get hot. have not done pre season on that sled yet to see how it held up last season but liking it so far.
Agman 57
Lifetime Member
- Joined
- Dec 28, 2006
- Messages
- 926
- Age
- 67
- Location
- Fostoria, Ohio
- Country
- USA
- Snowmobile
- 2018 Apex XTX LE, 50th Ann.
2018 Sidewinder LTX LE, 50th Ann.
2017 Sidewinder BTX LE
1992 V-Max 4 (Modded)
2002 ZR 120 G-daughter's
I have had the Backcountry 1.75 x 144 on 4 sleds now and have gotten along Great with all of them. I wouldn’t think Of running anything else. They wear great, are good on & off trail
yamadoo
Yamadoo is a snowmobile ' aholic'.
- Joined
- Jun 3, 2003
- Messages
- 3,645
- Country
- USA
- Snowmobile
- 15 Viper STX DX red/white- GPS and KING AIR suspension 4kmiles
13 Apex XTX 45 anniversary RED/WHITE/BLACK 3K miles
10 Vector LTX Blue 9kmiles
11 Venture GT 4k miles
86 SnoScoot(2) for grand kids
But Dan wouldn’t a guy need some POWER to push that 1.75 LOL
- Joined
- Jun 1, 2004
- Messages
- 7,736
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
well i did get his 2018 apex xtx up to 97 mph with that track on it while helping break it in.
Agman 57
Lifetime Member
- Joined
- Dec 28, 2006
- Messages
- 926
- Age
- 67
- Location
- Fostoria, Ohio
- Country
- USA
- Snowmobile
- 2018 Apex XTX LE, 50th Ann.
2018 Sidewinder LTX LE, 50th Ann.
2017 Sidewinder BTX LE
1992 V-Max 4 (Modded)
2002 ZR 120 G-daughter's
Hi Mark, Sorry I didn’t see this sooner.
We’re at Indy with some of the TY guys at the US Nationals.
I have not noticed any HP difference?
hibshman25
Vendor
- Joined
- Sep 25, 2005
- Messages
- 2,865
- Age
- 40
- Location
- Lebanon, PA 17042
- Country
- USA
- Snowmobile
- 2017 sidewinder ltx dx
2018 snoscoot
Based on your post do we assume you want only 1" lugs? If that's the case you could always cut down a track with taller lugs. I think that would be less work than trying to retrofit a 136 skid as you would need to change mounts.
yamadoo
Yamadoo is a snowmobile ' aholic'.
- Joined
- Jun 3, 2003
- Messages
- 3,645
- Country
- USA
- Snowmobile
- 15 Viper STX DX red/white- GPS and KING AIR suspension 4kmiles
13 Apex XTX 45 anniversary RED/WHITE/BLACK 3K miles
10 Vector LTX Blue 9kmiles
11 Venture GT 4k miles
86 SnoScoot(2) for grand kids
Your taking me to seriously, I just meant with your fantastic power this track is awesome..... Hope your harvest is shaping up well, and Jane is doing well as well.
