Carla 123
TY 4 Stroke Junkie
- Joined
- Feb 27, 2017
- Messages
- 528
- Location
- Lester beach
- Country
- Canada
- Snowmobile
- 2015 viper xtx boosted
17 zr9000 precision stage 3
Belt is maybe an 1/8 of an inch low on the secondary
I know I have to put washers on the secondary but wondered why is it so low in only 600 miles.clutching is stock and performance doesn't seem to be an issue as it ran 98 mph the other day.could the belt be smoked?running 8jp belt
I know I have to put washers on the secondary but wondered why is it so low in only 600 miles.clutching is stock and performance doesn't seem to be an issue as it ran 98 mph the other day.could the belt be smoked?running 8jp belt
Last edited:
Try removing the belt and set it in secondary only to check actual hieght.
09nytro
TY 4 Stroke God
Did you run on a stand then check ?
Carla 123
TY 4 Stroke Junkie
- Joined
- Feb 27, 2017
- Messages
- 528
- Location
- Lester beach
- Country
- Canada
- Snowmobile
- 2015 viper xtx boosted
17 zr9000 precision stage 3
Will do in the next day or so thanks
Carla 123
TY 4 Stroke Junkie
- Joined
- Feb 27, 2017
- Messages
- 528
- Location
- Lester beach
- Country
- Canada
- Snowmobile
- 2015 viper xtx boosted
17 zr9000 precision stage 3
YesDid you run on a stand then check ?
09nytro
TY 4 Stroke God
For some reason when you run it on a stand it won’t come back to the top !
Push and twist the belt around in secondary it should go back to the top!
Push and twist the belt around in secondary it should go back to the top!
Carla 123
TY 4 Stroke Junkie
- Joined
- Feb 27, 2017
- Messages
- 528
- Location
- Lester beach
- Country
- Canada
- Snowmobile
- 2015 viper xtx boosted
17 zr9000 precision stage 3
I will go for a little ride tomorrow and check.appreciate the replyFor some reason when you run it on a stand it won’t come back to the top !
Push and twist the belt around in secondary it should go back to the top!
Similar threads
- Replies
- 18
- Views
- 3K