Cat Magnetic Tether

[Monster Max]

Hi picked up the new Cat M9000 tether for my Nytro has I have decided to clean up my bars and lose my kill switch. Made the plug and play cable with the ends from Eastern Beaver and Molex. Cost about 8$ CDN for the cable and 70$ for the tether.

The tether is NC Part # 8639-075

Tether End: Molex 34900-2120

Yamaha End: Eastern Beaver 2P090WP-MT-L

I have absorbed so much knowledge and help from this website over the years, I figured I should pass some of my own.

Hope this helps some of you.

MM

 

[dane709]

do you have any connectors 4 sale ? or can tell me where to find the connector in canada

 

[Monster Max]

I a few left over...if you are ever down in Edmonton I can give you one. I bought them from Newark. The pins ( you need 2 are 43Y2420) and the plug is 5874039.

 

[dane709]

I a few left over...if you are ever down in Edmonton I can give you one. I bought them from Newark. The pins ( you need 2 are 43Y2420) and the plug is 5874039.

Thank you so much for the offer but I have found them online . Just wanted to confirm the part number you gave first was
Molex part number 34900-2120 for the plug
Newark Part No.: 58Y4039 for the plug

pins are : 43Y2420

Thanks so much in advance you have been a great help. I was having a lot of trouble finding the connector

 

[Monster Max]

Here is my order sheet to confirm...It didn't take me long to find them once my electrical guy at work reconized them. Newark lets you buy 1 or 2 which is nice. I know another guy had to buy a large minimum. What sled are you putting it on? I had to use relay on my nytro because of the current going through the kill circuit.

 

[dane709]

Here is my order sheet to confirm...It didn't take me long to find them once my electrical guy at work reconized them. Newark lets you buy 1 or 2 which is nice. I know another guy had to buy a large minimum. What sled are you putting it on? I had to use relay on my nytro because of the current going through the kill circuit.

2014 proclaim M8000 so I do not need the relay. thanks a million again

 

[dane709]

Here is my order sheet to confirm...It didn't take me long to find them once my electrical guy at work reconized them. Newark lets you buy 1 or 2 which is nice. I know another guy had to buy a large minimum. What sled are you putting it on? I had to use relay on my nytro because of the current going through the kill circuit.

 

[zx4ever]

What kind of relay did you put on for the nytro? Any pics of final product? This would help myself and a bunch of yamaholics in the future. Thanks.

 

[Rony]

Hi picked up the new Cat M9000 tether for my Nytro has I have decided to clean up my bars and lose my kill switch. Made the plug and play cable with the ends from Eastern Beaver and Molex. Cost about 8$ CDN for the cable and 70$ for the tether.

The tether is NC Part # 8639-075

Tether End: Molex 34900-2120

Yamaha End: Eastern Beaver 2P090WP-MT-L

I have absorbed so much knowledge and help from this website over the years, I figured I should pass some of my own.

Hope this helps some of you.

MMView attachment 142898View attachment 142899View attachment 142900View attachment 142901

Once I find the connections to build this plug in wire what does the white end connect to I have not yet found a proper wire or plug on the sled