Allan
TY 4 Stroke Junkie
Took chain case apart because I had a leak from around the gasket.
Seen that the reverse chain put a wear mark on the cover. There is 15000km on sled.
Seen that the reverse chain put a wear mark on the cover. There is 15000km on sled.
Allan
TY 4 Stroke Junkie
upei93
TY 4 Stroke Guru
- Joined
- Apr 27, 2008
- Messages
- 943
- Location
- Dalhousie, NB
- Country
- Canada
- Snowmobile
- 2015 Viper X-TX LE MPI turbo
2009 Nytro XTX
upei93
TY 4 Stroke Guru
- Joined
- Apr 27, 2008
- Messages
- 943
- Location
- Dalhousie, NB
- Country
- Canada
- Snowmobile
- 2015 Viper X-TX LE MPI turbo
2009 Nytro XTX
Attachments
Allan
TY 4 Stroke Junkie
If you look at this parts
https://www.yamahapartshouse.com/oemparts/a/yam/56264d9987a86602c84a3e1a/track-drive-2
, yes it show on there for sure.
I just took it apart again and i havea clip between gear 20 and 22 but the part don't show on there. so when I had it apart 3000km ago I put the clip in the wrong place????
Help wanted fast lol
https://www.yamahapartshouse.com/oemparts/a/yam/56264d9987a86602c84a3e1a/track-drive-2
, yes it show on there for sure.
I just took it apart again and i havea clip between gear 20 and 22 but the part don't show on there. so when I had it apart 3000km ago I put the clip in the wrong place????
Help wanted fast lol
Allan
TY 4 Stroke Junkie
Just took the clip off that was between the 22 and 20 gear then put the 22 hear on and there only room for one clip on the out side.
So I'm I right when I say that the clip goes on the out side of the reserve gear and not between the 2 gears????
So I'm I right when I say that the clip goes on the out side of the reserve gear and not between the 2 gears????
Snowfun
VIP Member
- Joined
- Dec 7, 2014
- Messages
- 41
- Age
- 74
- Location
- Waterdown, Ontario
- Country
- Canada
- Snowmobile
- 2022 SRViper L-TX GT
Allan
TY 4 Stroke Junkie
Bearing are ok I think I had the clip in the wring place . I had the clip between the gears and it suppose to be on the out side of the reverse gear?
Once someone confirms that this is right I well put it back together
Once someone confirms that this is right I well put it back together
Snowfun
VIP Member
- Joined
- Dec 7, 2014
- Messages
- 41
- Age
- 74
- Location
- Waterdown, Ontario
- Country
- Canada
- Snowmobile
- 2022 SRViper L-TX GT
So you are saying that the mark was caused by the clip being in the wrong place?
Allan
TY 4 Stroke Junkie
Yes. as the reverse gear was not kept in place. so it could float a little and the reverse chain touched the cover.
Allan
TY 4 Stroke Junkie
Thanks to cannondale27 for clearing this up for me. Guys like you make this site a great place.
There is 2 groves is the shaft one for sleds with reverse and on for sleds without . I had my clip in the grove for sleds without reverse and that was the wrong place. I have have it on the outside of the revers gear.
I think I got lucky as I only made a small mark on the cover after 3000km.
There is 2 groves is the shaft one for sleds with reverse and on for sleds without . I had my clip in the grove for sleds without reverse and that was the wrong place. I have have it on the outside of the revers gear.
I think I got lucky as I only made a small mark on the cover after 3000km.
