phazerkid
Extreme
thanks for all the replies guys.But i have one more question.
What are you using for chaincase oil?
What are you using for chaincase oil?
4strokelover87
Lifetime Member
Amsoil 2000!!!! Great stuff!!
Len Todd
TY 4 Stroke God
I use Yamaha's chain case oil. But, ...
Anyway, sounds like you got this one solved. Good luck!
Anyway, sounds like you got this one solved. Good luck!
- Joined
- Jun 1, 2004
- Messages
- 7,835
- Reaction score
- 2,034
- Points
- 2,103
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
any synthetic gear oil will do. i am running royal purple 75w140 in mine.
rbailey3711
Newbie
- Joined
- Feb 27, 2008
- Messages
- 14
- Reaction score
- 0
- Points
- 681
- Location
- Crystal Lake, IL & White Pine, MI
- Country
- USA
- Snowmobile
- '16 SR Viper
Hey did you check the other end of the driveshaft bearing while you were working on it?
I've got 6500 miles on my '04 Warrior and the bearing went on the speedo end, took out the sensor ..... sealed bearing.
Found in forum and yamaha that you should replace both ends ... plan to do the chaincase end this spring.
I've got 6500 miles on my '04 Warrior and the bearing went on the speedo end, took out the sensor ..... sealed bearing.
Found in forum and yamaha that you should replace both ends ... plan to do the chaincase end this spring.
I had the same luck Monday night on my 05 RX1
vtdownhiller
Extreme
RedRX1 said:
Tuesday afternoon for me...must be an epidemic
Len Todd
TY 4 Stroke God
All you got to do is repack the bearing at the end-of-season and mid-season and you should be good to go for many moons!Key words, end-of-season: You need to make sure you get all the water out before letting is sit for 7 months.
