**sj**
Lifetime Member
remove the clutch, helix and spring (the clutch unloaded)...check your secondary bushing to hub play....some have too much slop in them...the tolerance whould be relatively tight not allowing sheave wobble
jonlafon1
Lifetime Member
- Joined
- Aug 18, 2014
- Messages
- 4,103
- Age
- 50
- Country
- USA
- Snowmobile
- 2022 Sidewinder LTX_SE
2024 Catalyst RXC
2017 Sidewinder LTX-SE. 11750 miles (SOLD)
This is like 2012 Arctic cat Two roller secondary.. Rollers floating in mid air, springs binding, rollers breaking.. and of coarse the shitty bushings
Last edited:
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
It is clearanced to spec, need to have the helix and spring installed for correct side to side play.
You will have play if you just put the two sheaves together without the helix on it.
You will have play if you just put the two sheaves together without the helix on it.
**sj**
Lifetime Member
It is clearanced to spec, need to have the helix and spring installed for correct side to side play.
You will have play if you just put the two sheaves together without the helix on it.
you think this much...seems excessive
thebest
Pro
I replace the bushing and still have 1 free roller
Similar threads
- Replies
- 7
- Views
- 1K
- Replies
- 25
- Views
- 47K