Mrfixit
Newbie
- Joined
- Feb 25, 2021
- Messages
- 5
- Reaction score
- 3
- Points
- 153
- Location
- Nova Scotia
- Country
- Canada
- Snowmobile
- 2004 RX1
Just bought an 2004 RX 1.
Saw a coolant leak from the bottom end and It had a dent in the heat exchanger.
I figured the heat exchanger had a crack in it and went through the process of removing it.
Turns out it was not cracked. a lot of effort to remove that heat exchanger for nothing.
turns out the leak is coming from the rubber elbow area going into the water pump.
I’m not sure if it’s the water pump.
Should I pull the engine now or just try to replace the elbow.
Sled sat for 2 years.
Any suggestions.
I am looking for a service manual pdf if someone has it also.
Thanks all.
Saw a coolant leak from the bottom end and It had a dent in the heat exchanger.
I figured the heat exchanger had a crack in it and went through the process of removing it.
Turns out it was not cracked. a lot of effort to remove that heat exchanger for nothing.
turns out the leak is coming from the rubber elbow area going into the water pump.
I’m not sure if it’s the water pump.
Should I pull the engine now or just try to replace the elbow.
Sled sat for 2 years.
Any suggestions.
I am looking for a service manual pdf if someone has it also.
Thanks all.
Last edited: