phazer_boy
Veteran
Planning on cutting it lower.
Anyone have any pic of someone that have done this?
How high should i leave them?
Anyone have any pic of someone that have done this?
How high should i leave them?
towerrigger
TY 4 Stroke Junkie
I cut mine down to a 1.75. Works really well around the the flat praires. I bought a CE for the mountains. Slider wear is so so as long as the scratchers are down. I used a olfa knife with WD-40 sprayed on the blade. Make up a jig to specified height you want and cut away.
- Joined
- Jun 1, 2004
- Messages
- 7,723
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
we cut one down to 1-1/2" to extend a war to 153". all we used was a carpet knife and a guide for the lug height.
tapex_07
TY 4 Stroke Master
- Joined
- Feb 15, 2009
- Messages
- 1,160
- Country
- USA
- Snowmobile
- '10 Nytro MTX SE IMPULSE 174x3
'14 Viper XTX SE MPI 159x14x1.25
'07 Apex RTX SC2 MPI 128x1
My buddy cut his down to 1.5". Used an electric fillet knife.
Super Sled
Lifetime Member
- Joined
- Feb 25, 2009
- Messages
- 3,631
- Location
- Riding on the North Shore, MN
- Country
- USA
- Snowmobile
- Summit X
tapex_07 said:
Awesome idea!
Box cutter works too.
gomer
Extreme
Search youtube, there are a few vids showing how to cut a track. I just went with them, sharped a sawzall blade, made a guide, and went at it. Works pretty slick. Overall, took me about 2 hours, sharpening sawzall blade and making the guide included. I cut mine down to 1.5".
