YukonMP
TY 4 Stroke Guru
- Joined
- Dec 25, 2014
- Messages
- 838
- Location
- Yukon Territory
- Country
- Canada
- Snowmobile
- 2014 Venture MultiPurpose 2020 VK Professional ll
Thanks Stan, that is about what I thought.
The new VK540 is a contender, I can't imagine what it would do with those skis.
The new VK540 is a contender, I can't imagine what it would do with those skis.
Jason Harrell
Extreme
- Joined
- Aug 28, 2015
- Messages
- 53
- Age
- 50
- Location
- Unalakleet, Alaska
- Country
- USA
- Snowmobile
- 2009 Arctic Cat F570, 2016 Yamaha Venture mp
Unalakleet, Alaska....had not started my 2016 Venture MP for a week, and it’s been 10-25 below. Started it the other morning with no problem at -25f. Haven’t had to use the coolant heater yet. So far, I’m happy I went with the mp rather than the Doo Expedition 900 ace...I personally know a few people who’s 600 or 900 ace had mystery electrical issues that prevented starting. Missed out on weeks of hunting/trapping...one of the guys ended up just buying another snow machine.
Royboy
Veteran
- Joined
- Nov 21, 2016
- Messages
- 30
- Age
- 54
- Location
- Winnipeg
- Country
- Canada
- Snowmobile
- Yamaha venture multi purpose
I’m thinking about building a very small compact portable propane stove/heater/ burner that could be put into engine compartment to warm engine if in remote area. I will never need it but I like a challenge! Lol .. it can be done and be safe as well.....don’t think it be too hard . No need for electricity
Ex mountain rider
Newbie
I know this is a old post but so you have pictures? I looked and it’s right tight looks like rubber hose next to heater will be sitting on the heater, I worried if will start to melt hose. The hose I circled the one you installed it on?I had a 2008 with dealer installed coolant heater.oil heater.trickle charger.sled would start on its own down to -22,f..plugged in all night maybe -26,f.coolant heater heated every thing but engine,i moved coolant heater to front of engine to the water pump outlet hose[tight fit but doable] will now start any temp in one hour plugged in.highly recommend ski shim to correct eratic ,darting steering.