Drivers

[09nytro]

What tooth drivers are on the RTX SE .....8 or 9

 

[Yamadog]

I saw it on here earlier post but I cannot find it but my poor memory believes it was 8. Oops here it is :


"I will be installing a 153" 2.6" powerclaw on my XF7000. The 141" Viper/XF7000 use the same part # 3" pitch 8 tooth drivers as the Proclimb mountain sleds, which run the 2.6" powerclaw. I checked them out at a sneak peak earlier this year and it looks like that they should fit.
My sled is in route to the dealer as I type this, so hopefully I should know for sure soon! "

Thats what he said

 

[DeerHuntr]

Rtx/Ltx have 9 tooth xtx has 8 tooth as per Sled talk blog.

 

[DeerHuntr]

http://snowmobiles.yamahablogs.ca/

 

[Yamadog]

Missed it by that much! ok well I was right on 1 out of 3 that would be a good batting average

 

[fidz]

2.52 or 2.86

 

[devinzz1]

2.52 or 2.86

2.86

 

[fidz]

oh boy driver 9 and 2.86 TOP SPEED ....................

 

[09nytro]

Rtx/Ltx have 9 tooth xtx has 8 tooth as per Sled talk blog.

Thanks !!

 

[DeerHuntr]

oh boy driver 9 and 2.86 TOP SPEED ....................

Why? Wouldn't the gear ratio in the chain case have more to do with it?

 

[09nytro]

oh boy driver 9 and 2.86 TOP SPEED ....................

Why? Wouldn't the gear ratio in the chain case have more to do with it?

Yes !

 

[09nytro]

Is there a formula to fig out gear ratio ?
9 tooth driver 2.86 pitch , I would like to get my gear ratio close to if right on 2.00 , so I'm thinking there got to be a way to fig that out ?

 

[yukon yamaha]

http://www.ibackshift.com/article/top-s ... on-133.asp

 

[09nytro]

Cool thanks!

 

[09nytro]

If the gearing is 24T & 50B then it's 2.08 ratio , that close to what I like the gearing at