• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

? for 07 rtx owners

TJRTX

Extreme
Joined
Mar 28, 2007
Messages
110
Location
Wisconsin
Could anyone with a 07 (or 08,09 ) apex rtx with the proactive skid please help me with some measurements.I need the measurement from rear suspension mount bolt (center of bolt), back mount of skid, to the upper a-arm right at back side of arm, not bolt or nut. So right at yellow a-arm. One side measures around 57 inches and the other 56 1/2 inch. My brother hit a rock a few weeks back and bent left side a-arm. After insurance work was complete i had to adjust tie-rods to straighten skis and bars. It goes nice and straight down trail but wondered if something still wasnt right. So we took the measurements and found the difference between the two a-arms. My mistake on not getting dealer to check all of this. We didnt think right side of sled took any of the hit, but think now it might be tweaked. So I'm trying to find out what measurement is stock. They replaced both upper and lower left side a-arms. No visual damage to right side, thats what makes this tough. Any help would be much appreciated. I did measure a apex attack and though different length to a-arm they were both the same measurement. I'm not sure if i should live with the 1/2 " difference or not. I'm very anal about sleds running as straigh as possible. Thanks for any feedback.
 

Anyone? If it would make it easier you could take measurements from back of track to a-arms so you wouldnt need two people. Thanks.
 


Back
Top