ecopter
TY 4 Stroke Guru
Yea, I have money to waste, so I bought the accessory front bumper for the Phazer and installed it yesterday.............sorry, no pics. It definitely makes the sleds front look cool. And with the additional bit of protection, along with lifting surface area, it's a really nice touch. It's rather beefy, too. It's all aluminum tubing and much stronger than the stock horse shoe bumper.
I also added a skid plate. It's nice Yamaha recognized the need for factory threads with bolts where they use to install rivets. This means there no need to drill the rivets and in turn install rivnuts in their place. You simply remove the threaded bolts, install the skid plate and use the required clamps that secure the front to the frame tube. Much easier!
Put a set of Woody's Dual carbides on each side, handle bar mirrors, and replaced the tall windshield on the GT with a shorty. I also got the normal handle bar bag of the other model sleds to work on the Phazer by simply winding the slack of the fasteners around the handle bars and securing it with the hook-n-loop once they were wound. I haven't seen and accessory bag yet for that area, so this will work well. Still need to tap into the 'hot wire' for a heated shield plug. After that, mother nature needs to cooperate.
Jon
I also added a skid plate. It's nice Yamaha recognized the need for factory threads with bolts where they use to install rivets. This means there no need to drill the rivets and in turn install rivnuts in their place. You simply remove the threaded bolts, install the skid plate and use the required clamps that secure the front to the frame tube. Much easier!
Put a set of Woody's Dual carbides on each side, handle bar mirrors, and replaced the tall windshield on the GT with a shorty. I also got the normal handle bar bag of the other model sleds to work on the Phazer by simply winding the slack of the fasteners around the handle bars and securing it with the hook-n-loop once they were wound. I haven't seen and accessory bag yet for that area, so this will work well. Still need to tap into the 'hot wire' for a heated shield plug. After that, mother nature needs to cooperate.
Jon
go200mph
Expert
We need pics
Superman
TY 4 Stroke Master
go200mph said:
Pics Please!
Phazed-Coug
Expert
would love to see some pics... its one of the things I'm considering spending my yamabucks or whatever on.
PhazerFunXtreme
Newbie
we sill se pics! 
trilite
Newbie
Bakemono
TY 4 Stroke Guru
I think the optional bumper is ugly. Im waiting to see if Blingstar comes out with bumpers for the Phazer.
Id love to put one of those "iron cross" bumpers on mine.
Id love to put one of those "iron cross" bumpers on mine.
Phazed-Coug
Expert
ahh I see they have a new picture on the yammi site... before it
was just the bar... couldn't make it out.
was just the bar... couldn't make it out.
Similar threads
