- Joined
- Apr 17, 2003
- Messages
- 5,375
- Location
- Menno, SD
- Website
- www.ulmerracing.com
- Country
- USA
- Snowmobile
- 2014 Yamaha SR Viper LTX, 2014 Yamaha SR Viper RTX SE, 2015 Yamaha SR Viper MTX SE 162 (turbo), 2015 Yamaha SR Viper MTX SE 153
- LOCATION
- Menno, SD
- WEBSITE
- www.ulmerracing.com
24/50 according to the magazines is used on all models of Yamaha. There's no "official" specs out yet from Yamaha.
RTX/LTX is 9 tooth 2.86 pitch drivers which gives you about 101 mph top speed @ 1:1 clutch ratio.
XTX is 8 tooth 3.0 pitch drivers which gives you about 95 mph top speed @ 1:1 clutch ratio.
RTX/LTX is 9 tooth 2.86 pitch drivers which gives you about 101 mph top speed @ 1:1 clutch ratio.
XTX is 8 tooth 3.0 pitch drivers which gives you about 95 mph top speed @ 1:1 clutch ratio.
09nytro
TY 4 Stroke God
Thank you !
Nytro40th
TY 4 Stroke God
- Joined
- Sep 19, 2007
- Messages
- 1,798
- Location
- Amherstview Ontario
- Country
- Canada
- Snowmobile
- 2014 SR Viper RTX SE
thanks
yukon yamaha
TY 4 Stroke Master
- Joined
- Jan 30, 2008
- Messages
- 1,092
- Age
- 39
- Location
- WHITEHORSE, YUKON CANADA
- Country
- Canada
- Snowmobile
- 2008 nytro custom! 2014 viper custom
hmmm big gears larger oval maybe less rolling resistance? and still a 2.08 ratio with large drivers and 8" wheels this could be an awesome set up!
09nytro
TY 4 Stroke God
Yes it could , it's right there were I like my ratio at
fxnytroxtx
Guest
For the 8" wheels would need an offset axle or just have the wheels hang lower then the sliders?
yukon yamaha
TY 4 Stroke Master
- Joined
- Jan 30, 2008
- Messages
- 1,092
- Age
- 39
- Location
- WHITEHORSE, YUKON CANADA
- Country
- Canada
- Snowmobile
- 2008 nytro custom! 2014 viper custom
not sure, I just phoned up OFT and ordered a 3 wheel inside rail kit
fxnytroxtx
Guest
yukon yamaha said:not sure, I just phoned up OFT and ordered a 3 wheel inside rail kit
if there won't be a 4wheel kit I'm going get a 3wheel kit, I just can't trust 2 wheels, plus if the rear axle is the same as last years 800rr it will be a royal pain in the butt to unscrew, my hand where bleeding trying to adjust the track on it. I really don't like the look of the wheels being inside.
13 RR is way different. 14 RR is same as other ProCrosses and our Vipers with a wimpy TriHub that no Racer in thier right mind would ever use.
Nytro40th
TY 4 Stroke God
- Joined
- Sep 19, 2007
- Messages
- 1,798
- Location
- Amherstview Ontario
- Country
- Canada
- Snowmobile
- 2014 SR Viper RTX SE
Be aware that the short track 128 137 has a stock wheel of 7.125 and can be upgraded to a 7.5. XTX has a 8 inch wheel size OFT does not have a 7.5 option at this point, but I am sure they will, fingers crossed since my big nutz kit has no wheels.
rxwhopper
TY 4 Stroke Guru
Anyone know what angle helix it has
- Joined
- Apr 17, 2003
- Messages
- 5,375
- Location
- Menno, SD
- Website
- www.ulmerracing.com
- Country
- USA
- Snowmobile
- 2014 Yamaha SR Viper LTX, 2014 Yamaha SR Viper RTX SE, 2015 Yamaha SR Viper MTX SE 162 (turbo), 2015 Yamaha SR Viper MTX SE 153
- LOCATION
- Menno, SD
- WEBSITE
- www.ulmerracing.com
Same as a FX Nytro.
09nytro
TY 4 Stroke God
J&T products has a kit with 7.12 or you can upgrade to 7.5 looks like a very nice kit to ( two on inside and two on outside )Nytro40th said:Be aware that the short track 128 137 has a stock wheel of 7.125 and can be upgraded to a 7.5. XTX has a 8 inch wheel size OFT does not have a 7.5 option at this point, but I am sure they will, fingers crossed since my big nutz kit has no wheels.
RTX Meirda
TY 4 Stroke Master
Are these gears interchangable with the old Yamaha gears or are we into something totally different?
YamahaTim
Lifetime Member
- Joined
- Sep 21, 2013
- Messages
- 2,089
- Age
- 54
- Location
- Farmington, MN
- Country
- USA
- Snowmobile
- 2014 Yamaha Viper LTX SE MPI Turbo
I'm not sure what the gears are, but with the turbo on it I was told you run out of gear around 108 mph on gps. And I ordered a 4 wheel kit and the wheels on the LTX and XTX are 8.4 and for the RTX are 7.5.
Similar threads
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.