WeSled2
Extreme
It's good to be back!LazyBastard said:What the hell are you talking about???
have you seen this?
- Thread starter dexter
- Start date
ok... found a welder that will do it with a tig welder. he claims it uses high frequency and can cook my electronics... 
he says that I would have to disconnect everything to avoid this issue... thoughts???
he says that I would have to disconnect everything to avoid this issue... thoughts???
dexter said:ok... found a welder that will do it with a tig welder. he claims it uses high frequency and can cook my electronics...
They make brazing/soldering rods for aluminum repair. You need a MAPP torch - they work well.
http://www.aluminumrepair.com/
thanks 4fighter... I checked that out and looks like a great idea, but I wonder about the electronics.. I did find someone to do it, but he wants all electronics unplugged to avoid cooking the computers... I want to avoid this. how bout some JB Weld??
- Joined
- Jun 28, 2004
- Messages
- 2,436
- Reaction score
- 500
- Points
- 1,723
- Location
- Clinton, Wi.
- Country
- USA
- Snowmobile
- '11 Apex XTX, '09 Venture GT, '06 Attak, 08 Nytro Hybrid
Yank the skid and deliver it to him. Had SEVERAL repairs to my Viper and had a guy that builds racecar chassis weld mine. Never broke where he repaired it.
bdm
Expert
Viper_Dave said:
skid?
- Joined
- Jun 28, 2004
- Messages
- 2,436
- Reaction score
- 500
- Points
- 1,723
- Location
- Clinton, Wi.
- Country
- USA
- Snowmobile
- '11 Apex XTX, '09 Venture GT, '06 Attak, 08 Nytro Hybrid
DOH!!!! Wrong thread!! There was a fella' looking at repairing his rails and I #*$&@-umed . My apologies and I'll try better next time LOL!!
rx1 man 04
Expert
- Joined
- Oct 4, 2007
- Messages
- 219
- Reaction score
- 8
- Points
- 698
- Location
- ottawa
- Country
- Canada
- Snowmobile
- 2007 Yamaha apex gt and 2012 Yamaha apex xtx
try jb weld
try putting some jb weld on it, really tough stuff, I cracked my chaincase last year when I was changing the driveshaft bearing, put some jb weld on it and no problems since, no leaks works great. not sure if you can get it in the states or not. Your local automotive or hardware store should have it.
try putting some jb weld on it, really tough stuff, I cracked my chaincase last year when I was changing the driveshaft bearing, put some jb weld on it and no problems since, no leaks works great. not sure if you can get it in the states or not. Your local automotive or hardware store should have it.
