Toolman
Extreme
I have to sell my baby. I bought it new and have redone nearly everything. I had it before haydays in 02 and it was used to gunea pig many of the aftermarket parts back then. My l4 vertebrae has been broken for almost three years and the disc finally gave out so I have to let them cut me open and fuse it. No more riding for awhile. Here is the list.
136" MPI extension
AD Boivin Expert X with plates on inside.
136" ripsaw track, trued drivers
hauck exhaust
Heel-X roller secondary kit
Heavy hitters
Flo-Commanders on the primary and secondary system of carbs(development sled)
4- LoBoy airvalves in the aircleaner
Boss seat
NOS fogger system with fuel pump and bottle heater and CB Performance fuel tank.
Holtzman carb springs
rejetted, aftermarket headlight bulbs, 2 windshields, modded primary clutch, handguard, tunnel plates
Warrior heat exchanger
About 2000 miles, great shape, couple small scuffs on hood.
Any ideas on what to ask, I hate to let her go, but no more riding for me for quite some time and I will have several months of rehab coming after the operation.
thanks
136" MPI extension
AD Boivin Expert X with plates on inside.
136" ripsaw track, trued drivers
hauck exhaust
Heel-X roller secondary kit
Heavy hitters
Flo-Commanders on the primary and secondary system of carbs(development sled)
4- LoBoy airvalves in the aircleaner
Boss seat
NOS fogger system with fuel pump and bottle heater and CB Performance fuel tank.
Holtzman carb springs
rejetted, aftermarket headlight bulbs, 2 windshields, modded primary clutch, handguard, tunnel plates
Warrior heat exchanger
About 2000 miles, great shape, couple small scuffs on hood.
Any ideas on what to ask, I hate to let her go, but no more riding for me for quite some time and I will have several months of rehab coming after the operation.
thanks
ualav8
Expert
Fog the pi$$ out of the cylinders and carbs, remove the battery and gas, coat the metal parts with a light oil, cover her, and store your baby in a good indoor location. You will take a huge bath if you sell your sled now and one day you will be ready to ride again!
kinger
VIP Member
- Joined
- Jan 17, 2005
- Messages
- 7,410
- Reaction score
- 1,547
- Points
- 1,963
- Location
- Clear Lake, IA
- Website
- www.piergenius.com
Yeah had a similar set up Zx2 rear suspension, nitrous, lots of add ons and I was going to get about $3500-$3800 and consider myself lucky. Instead I parted it out and paid for my new (used) sled. If you just need it gone figure $3500 if your back will take dismantling it I woudl part it out. You coudl almost get $3000 just for the seat, rear end, nitrous, track and exhaust. I sold my engine for $1100 which was lower then I expected, so you coudl easily get $4000-5000 in large dollar parts. The little things like wiring, gauges, hood, plastic, etc all add up to another $2000 but will take a couple years to sell it all. Good luck on your back!
