HELP!!! with track slippage (ratcheting?)

[chadderbox]

Hi all , is there any way to stop my track from slipping without it being "guitar string" tight? lol
2003 RX1 . 121"

 

[Grimm]

Extrovert drive cogs on the driveshaft.

 

[MrSled]

no, the only way is pull front limiter up a hole or 2 and keep a tight track... or go to extroverts.

 

[chadderbox]

no, the only way is pull front limiter up a hole or 2 and keep a tight track... or go to extroverts.

k thanks mr.sled & grimm, where's the best place to get them

 

[MrSled]

k thanks mr.sled & grimm, where's the best place to get them

I think Wahl Brothers or Avid from what hear, they are the best

 

[chadderbox]

I think Wahl Brothers or Avid from what hear, they are the best

o k thank you,i'll pull straps up for now til' i find some

 

[Winderallday!]

check your suspension arms for cracks/damage, also front suspension shock could be toast, seen it happen to a buds RX-1
keep in mind with extrovert drivers all windows in track must be open.

 

[chadderbox]

check your suspension arms for cracks/damage, also front suspension shock could be toast, seen it happen to a buds RX-1
keep in mind with extrovert drivers all windows in track must be open.

ty,apex all day, good point on the windows , and i plan on upgrading the shocks w/in the next couple weeks and do a skid swap this summer

 

[hibshman25]

To run extroverts in rx 1 you must trim them or they will hit the front arm.

I stock kimpex extroverts for only $70 a set. I can also sell whole shaft with a set pressed on if you don't have access to a press.