lawmanbsi
Expert
Sled is idling at 1000rpm. How do I adjust this up?
I did a search, only thing close was the fuel mixture procedure.
Also I just installed a super Q shorty muffler. the one that goes with the mountain seat.
I did a search, only thing close was the fuel mixture procedure.
Also I just installed a super Q shorty muffler. the one that goes with the mountain seat.
FLYBYU
VIP Member
On the side of the idle control valve there is a black knob to adjust idle. Make sure throttle bodies are syncd, compression is good, air filter is clean. Idle should 1500 rpm + or - 100 rpm
chiefsledhead
Extreme
make sure the engine is fully up to temp. Otherwise you will be setting it too high once it warms up.
Irv
TY 4 Stroke God
- Joined
- Mar 23, 2005
- Messages
- 3,778
- Reaction score
- 44
- Points
- 1,233
- Location
- ONT. Canada
- Country
- Canada
- Snowmobile
- 2008 40th Anniversary Vector.
1995 XLT SP (Son's)
lawmanbsi said:Sled is idling at 1000rpm. How do I adjust this up?
I did a search, only thing close was the fuel mixture procedure.
Also I just installed a super Q shorty muffler. the one that goes with the mountain seat.
Does it idle smooth at that RPM and has it always idled like that?
I'd try a can of Sea Foam or 2 over the course of a couple weeks first and see what happens?
lawmanbsi
Expert
Idle is smooth and yes its always been low. never bothered me until Rock told me it was too low and if I kept it like that my hand warmers won't heat up at idle. which is true, I always associated it with the crappy bars.
basic700
TY 4 Stroke Junkie
- Joined
- Mar 5, 2010
- Messages
- 596
- Reaction score
- 25
- Points
- 888
- Location
- Norwalk WI
- Country
- USA
- Snowmobile
- 2018 Sidewinder STX DX 146
2015 SRViper XTX LE
2009 Nytro XTX
Set the idle at like 2,500 that would be a good starting point.
Lol JK
Lol JK
justin gallant
Expert
- Joined
- Aug 28, 2017
- Messages
- 234
- Reaction score
- 31
- Points
- 213
- Location
- moncton
- Country
- Canada
- Snowmobile
- 2006 apex GT
- LOCATION
- moncton new-brunswick
mine is to high and sounds like a 2 stroke on idle lol I think I moved the wrong screw. I was setting the idle the other day and I moved the screw in the middle of my throttle ..that's the one the manual sais to move anyway. some guys say its the black nob on the side???? im confused, any one can help me?
TBay Sledhead
TY 4 Stroke Master
- Joined
- Jan 16, 2005
- Messages
- 1,129
- Reaction score
- 39
- Points
- 1,088
- Location
- Thunder Bay, Ontario.Ca
- Country
- Canada
- Snowmobile
- 06 Attak
01 SXR Long Track
See the knob on the bottom left of the pic, it goes into the end of the IAC housing which is located on the top left side of the engine attached to the throttle bodies. look in from the left side below the tin piece that holds the headlight pod.
Attachments
Last edited: