Is aftermarket roller secondary clutch a worthy mod for RX-1

[lightningpro-fred]

ROLLER SECONDARY

WE RUN OUR ROLLER ON OUR SX`S AND NOW ON THE TURBO RX-1.
IT CAN BE SEEN ON OUR WEB SITE ALONG WITH ACTION VIDEOS OF THE RX-1 WITH ROLLER,IN ACTION.

FORM YOUR OWN CONCLUSIONS!

lightningproinc.com FRED

 

[KbxSrx]

roller clutches

I ran the hitech er on my ekholm mountain SRX and it worked GREAT, but couldnt get it dialed in on the rx-1. We are riding the big hills in the fall, revy, and I am gearing to 18-43, supposed to make all the difference in the world out there. I am also going to 9 tooth drivers, hope it will pull it.

 

[BETHEVIPER]

i feel the best version is either lightning pro or haucks. If i was buying new it would be a lighting pro as they suport this site and hauck does not.

i have used my roller for 3 year and the only thing needed this year is a set of rollers.

The thing i like best about this style roller is that it uses stock helixes that everyone has around. the other thing is that it adds like no spinning weight. that high tech one weighs a ton.

as far as a roller being a direct bolt on it is a non issue. with a complete secondary 100$ now buying a spare to sell your sled with makes it still cheaper and easier.

fred, will your rollers fit in a hauck roller? if so i need a set

 

[maxdlx]

Bump

 

[tedgoesfast]

ive been running a team tied secondary for 3 years a bit to get sled right also gets very unefficiant in overdrive so cant gear down as low as yamaha secondary but has worked excellant fast backshifts .