chenariverrunner
Newbie
- Joined
- Oct 7, 2015
- Messages
- 4
- Reaction score
- 0
- Points
- 31
- Location
- US
- Country
- USA
- Snowmobile
- 2009 M1000, 2006 Apex, 2013 Rush 600, 2001 Z120, 1986 Tundra
Just about finished installing a used turbo kit from a salvage dealer. This map sensor attached to the efi box is not in the instructions I have. Also can't figure out where this is supposed to mount. The bracket does not fit anywhere in front of the steering column.
Kit did not come with a fuel pump either. How much boost can the stock pump support?
Sent from my SAMSUNG-SM-G891A using Tapatalk
Kit did not come with a fuel pump either. How much boost can the stock pump support?
Sent from my SAMSUNG-SM-G891A using Tapatalk
06 apex yamcharger
Extreme
- Joined
- Feb 14, 2010
- Messages
- 58
- Reaction score
- 10
- Points
- 688
- Location
- Miramichi N.B Canada
- Country
- Canada
- Snowmobile
- 2012 apex xtx 315 MCX
it bolts to your steering column, the bracket that is on the back of the efi box does not come with the kit
06 apex yamcharger
Extreme
- Joined
- Feb 14, 2010
- Messages
- 58
- Reaction score
- 10
- Points
- 688
- Location
- Miramichi N.B Canada
- Country
- Canada
- Snowmobile
- 2012 apex xtx 315 MCX
www.mcx.se you can find the instructions here and it will show u a pic of the box and where to mount it
06 apex yamcharger
Extreme
- Joined
- Feb 14, 2010
- Messages
- 58
- Reaction score
- 10
- Points
- 688
- Location
- Miramichi N.B Canada
- Country
- Canada
- Snowmobile
- 2012 apex xtx 315 MCX
chenariverrunner
Newbie
- Joined
- Oct 7, 2015
- Messages
- 4
- Reaction score
- 0
- Points
- 31
- Location
- US
- Country
- USA
- Snowmobile
- 2009 M1000, 2006 Apex, 2013 Rush 600, 2001 Z120, 1986 Tundra
Thanks, I will make some spacers and mount it there. What about the extra map sensor? The instructions are for a different version of efi box that does not show it.
