J&T Products brand new 4th wheel kit will be available soon!!
We will be using four 8 inch stealth wheels with the larger bearings like we have been using in our 137 inch and longer track trihub kits. The 2019 factory stock wheel look like they might not last as long as we would like.They have a thin outside diameter that studs will probably wear out. Our kit will be indestructible and most likely will go over 10,000 miles with no problems. We will have the lifetime replacement warranty on the axle like we do on our other wheel kits. Should be ready for sale in about a week or so. We will be keeping the price at the same as our Stealth kits have been at $270.00. Its a real nice piece!!
www.jtatv.com
We will be using four 8 inch stealth wheels with the larger bearings like we have been using in our 137 inch and longer track trihub kits. The 2019 factory stock wheel look like they might not last as long as we would like.They have a thin outside diameter that studs will probably wear out. Our kit will be indestructible and most likely will go over 10,000 miles with no problems. We will have the lifetime replacement warranty on the axle like we do on our other wheel kits. Should be ready for sale in about a week or so. We will be keeping the price at the same as our Stealth kits have been at $270.00. Its a real nice piece!!
www.jtatv.com
Last edited:
Wow very nice!
ROCKERDAN
OCD Sledhead
- Joined
- Oct 8, 2005
- Messages
- 7,496
- Location
- Huntsville Ontario & Niagara NY
- Country
- Other
- Snowmobile
- '18 RTX 50th "Winder"
For '19 models only? Not older 998s?
thanks
Dan
thanks
Dan
Unless he makes a pattern to cut our rail hole Like Travis was talking about just 19's.
ROCKERDAN
OCD Sledhead
- Joined
- Oct 8, 2005
- Messages
- 7,496
- Location
- Huntsville Ontario & Niagara NY
- Country
- Other
- Snowmobile
- '18 RTX 50th "Winder"
Yeah I think we can cut our rails....Liking the new axle!
Me too.
sledding rocks
Expert
I have a brand new set 8.4 big wheel set for the xf or m series sleds for sale $300 , I thought they would work on my 2019 , unfortunately they don't , anyone interested please message me ,
1nc 2000
Lifetime Member Tim
- Joined
- Feb 26, 2010
- Messages
- 3,206
- Location
- Marquette, MI
- Country
- USA
- Snowmobile
- Yamaha FX Nytro RTX SE
Is the shaft a thru shaft from one end to the other?
I noticed with cat/Yamaha fourth wheel kit the outside wheels don't stay in line with the inboard wheels. They tend to be forward some from the play in bolt holes.
Does your axle keep all wheels putting even pressure on the track around the wheels?
I noticed with cat/Yamaha fourth wheel kit the outside wheels don't stay in line with the inboard wheels. They tend to be forward some from the play in bolt holes.
Does your axle keep all wheels putting even pressure on the track around the wheels?
All 19's shaft is all the way through.
1nc 2000
Lifetime Member Tim
- Joined
- Feb 26, 2010
- Messages
- 3,206
- Location
- Marquette, MI
- Country
- USA
- Snowmobile
- Yamaha FX Nytro RTX SE
I missed the part about being only 19 models.
Do they make one for the earlier years with a thru shaft inside of all the chunks to keep it true?
Do they make one for the earlier years with a thru shaft inside of all the chunks to keep it true?
Not that I know of.
I have never heard about the outside wheels being more forward before. The factory ones are not as good quality as our 4th wheel kit. Our wheel mounts have two steel pins that have a snug fit into the track adjusters so the bolt is not doing none of the work to hold mount in place. The bolt just tightens up the wheel and mount.
Similar threads
