No speedo and engine on limp mode

[drunkenrich]

Your talking about cog shaft bearing? Or secondary bearing?

 

[poor farmer/logger]

Jackshaft bearing behind the secondary and the driveshaft bearing on the left hand side. Just disassemble till you can see the seals. Take a sharp pick or something of the like and slide it in behind the seal right at the inner bearing race. Pop the seal out clean grease and reassemble.

 

[canoehead]

Jackshaft bearing behind the secondary and the driveshaft bearing on the left hand side. Just disassemble till you can see the seals. Take a sharp pick or something of the like and slide it in behind the seal right at the inner bearing race. Pop the seal out clean grease and reassemble.

X2

 

[yamafreak]

X2

X 3