bjowett
Lifetime Member
This sled is great... it works surprisingly well just cruising along, a bit stiff, but that is to be expected. However, when taken by the scruff, it simply rocks. Stable, no ski lift, turns when requested.
yam177
TY 4 Stroke Master
Stiff PSHHH go faster then it smooths out
edge_232
Expert
- Joined
- Jan 15, 2014
- Messages
- 254
- Age
- 50
- Location
- Madison WI
- Country
- USA
- Snowmobile
- 2011 Nytro MTX slowly being modded
2005 IQR Trail Converted
Can't wait to hear about the fronted more. I'll be getting an A- Arm / spindle set up soon.
mattyg1405
Expert
Best advice everyam177 said:Stiff PSHHH go faster then it smooths out
raginyamaha
TY 4 Stroke Master
x2!!yam177 said:Stiff PSHHH go faster then it smooths out
bjowett
Lifetime Member
No, even at full tilt, it does not smooth out that much. Again, that was expected from this set-up. I can, and will, make it do everything well with a Mono skid equipped with an Ohlins PDS Shock.
raginyamaha
TY 4 Stroke Master
so sad that Yamaha gave up on this setup. seemed to do better than the viper is doing this year....... late release a 2015 nytro or bring it back for 2016 with this front end Yamaha!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Superman
TY 4 Stroke Master
bjowett said:No, even at full tilt, it does not smooth out that much. Again, that was expected from this set-up. I can, and will, make it do everything well with a Mono skid equipped with an Ohlins PDS Shock.
I have Brian's Ohlins with PDS in the Mono shock in my Nytro. IMO the
Nytro really really likes the Mono shock rear suspension install.
edge_232
Expert
- Joined
- Jan 15, 2014
- Messages
- 254
- Age
- 50
- Location
- Madison WI
- Country
- USA
- Snowmobile
- 2011 Nytro MTX slowly being modded
2005 IQR Trail Converted
front end set up
So are we able to get this front end anywhere? I'm looking to replace the stock front end on my 2011in the near future.
So are we able to get this front end anywhere? I'm looking to replace the stock front end on my 2011in the near future.
I thought someone on here bought a race sled and was going to try to fab the race front end for resale.........
edge_232
Expert
- Joined
- Jan 15, 2014
- Messages
- 254
- Age
- 50
- Location
- Madison WI
- Country
- USA
- Snowmobile
- 2011 Nytro MTX slowly being modded
2005 IQR Trail Converted
I hope they do because it sounds like it's the best one out there that corrects the spindles, A-arms and shock angle.
bjowett
Lifetime Member
Thanks, Chris. Looks awesome.
I'll be riding and testing this front end for the remainder of the season. When the snow is no longer rideable, I'll pull the front end and have a look at developing it into an actual product.
I'll be riding and testing this front end for the remainder of the season. When the snow is no longer rideable, I'll pull the front end and have a look at developing it into an actual product.
edge_232
Expert
- Joined
- Jan 15, 2014
- Messages
- 254
- Age
- 50
- Location
- Madison WI
- Country
- USA
- Snowmobile
- 2011 Nytro MTX slowly being modded
2005 IQR Trail Converted
Perfect! I'll hold off on getting a front end then because I really like the sounds of this one. Thanks for the response and best to you in reproducing the front end.
bjowett
Lifetime Member
Similar threads
- Replies
- 32
- Views
- 4K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.