Oh yeah, i fergot... it will come with four 1/4 x 3" lag bolts and a half roll of duct tape to attach it with too! 
arteeex
TY 4 Stroke Master
Customer service is alive and well at OFT.
Makes me think it's time for some beer therapy.
Makes me think it's time for some beer therapy.
Only if it still has the aroma. Then it would be perfect.
Nytro40th
TY 4 Stroke God
- Joined
- Sep 19, 2007
- Messages
- 1,798
- Location
- Amherstview Ontario
- Country
- Canada
- Snowmobile
- 2014 SR Viper RTX SE
Iam in for block off plate that fit the stock header, my exhaust is a hauck husher 
Alatalo
TY 4 Stroke Master
Great idea, but I clicked "not interested" simply because I am using a quite special seat and exhaust combination and I am not expecting a manufacturer to produce a one-off block off plate for this. I could use the one for the under tunnel exhaust as a starting point, but I am already sorted with my own custom made unit.
Anyway, for everybody that doubts the effect of a block off plate and removed standard exhaust, please check my post in this thread (last post on last page):
http://www.ty4stroke.com/viewtopic.php?t=95811
Anyway, for everybody that doubts the effect of a block off plate and removed standard exhaust, please check my post in this thread (last post on last page):
http://www.ty4stroke.com/viewtopic.php?t=95811
I am in! Will it work with the stock header and a Hindle can?
Bahr05 said:
Changing out the exhaust donuts, header pipe or muffler will be no different than with the tunnel left open.
arteeex said:
Apparently your phone is broken. Therapy is in session regularly
swelly said:
We'll work on that for you Jim. You're probably so used to that sea smell, I'm wondering if you would even notice.
Nytro40th said:Iam in for block off plate that fit the stock header, my exhaust is a hauck husher
mcamzr said:
We'll have to get some measurements or a sample sled to work on the aftermarket exhaust systems. We have access to an Excell, but not a Hindle or a Hauck.
Pulled the trigger on the tooling. The block off plates will be available around the end of August.
Thanks for all of the feedback!
Scott
Scott, I may be able to help you out on one that will work with a Hindle setup...only problem is they have several possible setups....if interested pm me...if not I still want to get one for my Hindle sytem
4strokesmokextx
Extreme
mcamzr said:
We'll have to get some measurements or a sample sled to work on the aftermarket exhaust systems. We have access to an Excell, but not a Hindle or a Hauck.
Pulled the trigger on the tooling. The block off plates will be available around the end of August.
Thanks for all of the feedback!
Scott[/quote]
i could help you out with a barkers if your interested!
scmurs said:Bahr05 said:
Changing out the exhaust donuts, header pipe or muffler will be no different than with the tunnel left open.
arteeex said:
Apparently your phone is broken. Therapy is in session regularly
swelly said:
We'll work on that for you Jim. You're probably so used to that sea smell, I'm wondering if you would even notice.
Throw in some old rotten bait and I am so there.
Nytro40th said:Iam in for block off plate that fit the stock header, my exhaust is a hauck husher
mcamzr said:
We'll have to get some measurements or a sample sled to work on the aftermarket exhaust systems. We have access to an Excell, but not a Hindle or a Hauck.
Pulled the trigger on the tooling. The block off plates will be available around the end of August.
Thanks for all of the feedback!
Scott
revster
TY 4 Stroke God
- Joined
- Aug 18, 2004
- Messages
- 1,752
- Location
- La Salle MB
- Country
- Canada
- Snowmobile
- 2009 Yamaha Nytro RTX SE
shaddow44 said:
hhmmm and I may have one of the other set-ups in the near future and I will be getting another OFT plate if I do.
swelly said:
I didn't know there was catfish up there Swelly... I'm all in for some fried cat fillet and hushpuppies! That's the only fish I've ever used stink bait for... chicken livers basted 3 days in 100 degree summer sun! Best bait ever!
Back on topic...
OFT Racing tunnel block-off plates!
The tooling has been paid for and is being made. We will have the tunnel block off plates available by the end of August.
We are offering an incentive ( discount ) for pre-ordering the block off plates.
Stay tuned for plates that will fit aftermarket exhaust kits. Aftermarket block off plates will be available after Haydays.
Here is the link to our product page:
http://oftracing.com/Store/index.php?ma ... cts_id=229
We are offering an incentive ( discount ) for pre-ordering the block off plates.
Stay tuned for plates that will fit aftermarket exhaust kits. Aftermarket block off plates will be available after Haydays.
Here is the link to our product page:
http://oftracing.com/Store/index.php?ma ... cts_id=229
I am in on a pre order. And a relocate!
Bahr05
Expert
I'm in for a block off plate! I'll be pre-ordering that soon!
