oft and mountaintech

[korgull]

Now that I have brought my nytro, the question is were are oft and mountaintech located, Canada or Usa? I ask because I wonder about the shipping on their website I see the evaluation of shipping but if outside Canada do I have custom fees and taxes to add also? Because when I order pinball parts the shipping cost are always a lot more than the estimate.

I also notice that one of the two company can only be reach by email and has no phone number to make phone payments by visa it seams to work only with paypall, I never used yet paypall.

Does anyone had good transaction with them? or bad soties?

I think the quality of their products is about 11 out of 10 by the comments I read here.

If those two companys want to pm me I would be glad, I am looking for the folowing product:
-The stering relocator kit
-The roeist full skid plate, Can I fit a plastic floating skid like the big yamaha or the skinz one to it if I take great care that there is no space between the roest plate and the plastic one or the roest plate also works as a floating plate at the same time? *I want to be shure to have good floatation.
-I taught of the I.P vent with the I.P mount but, I want to know what is the benefit of this product, pro and con.
Thanks

 

[Nine2Nine]

Both are in the USA, and I'm sure both ship will USPS to Canada, it's UPS and Fedex that nail us with BS duty fees.. USPS now has some fee's from time to time but not much.

Both offer great product and service.

 

[Turtle]

They should be able to issue you an invoice through Paypal. You can then make payment to that invoice using either a paypal account, or a credit card. A paypal account is not required if you use your credit card. We do many of our transactions this way.

 

[rlcofmn]

Welcome to the Nytro world!

I do ship everything outside of the US with USPS to try to make the fees to you as cheap as possible. I do also offer all Mountaintech products so I can save you by combining shipping. I take PayPal or Credit Cards on my site and can be reached by Email if you need anything. If a phone call is needed I will gladly give you my number or give you a call. I do have a full time job so I don't want my phone to get so busy that all my customers get is a answering machine. This is the only reason my number is not on the site, but rest assured I am here for you if need be.

Thank you for your interest in OFT Racing

 

[korgull]

They should be able to issue you an invoice through Paypal. You can then make payment to that invoice using either a paypal account, or a credit card. A paypal account is not required if you use your credit card. We do many of our transactions this way.

you seam to have great product for the nytro, what is the advantage of steel "A arm" floatation skid over the plastic ones?

 

[korgull]

Welcome to the Nytro world!

I do ship everything outside of the US with USPS to try to make the fees to you as cheap as possible. I do also offer all Mountaintech products so I can save you by combining shipping. I take PayPal or Credit Cards on my site and can be reached by Email if you need anything. If a phone call is needed I will gladly give you my number or give you a call. I do have a full time job so I don't want my phone to get so busy that all my customers get is a answering machine. This is the only reason my number is not on the site, but rest assured I am here for you if need be.

Thank you for your interest in OFT Racing

thank you for the very quick reply, so for the I.P vent kit what is intended to provide exaclly, is there a use for this for trail riding or just offtrail? I want to know because I will order everithing at the same time thanks

 

[judger101]

the roest skid plate isnt really for flotation its mainly for protection. i really dont think those flotation skid plates do that much, plus they look silly. get some bigger skis that will really help you float.
the roest skid plate is a must imo.

 

[s1d3w1nd3r1480]

The IP vent kit is designed to help remove heat from under the hood of the Nytro, the stock parts tend to hold heat in there.

As for the skid plate. Buy the mountaintech (roest) one and call it good. It will possibly help flotation (likely minimal) but will make the bottom of your sled bulletproof. If you really want floatation change your skis and possibly see about float plates for the a-arms. I would not even consider putting another plate over the roest one. Just asking for trouble there IMO

 

[yamahinn03]

Ordered my Relocator Kit on the 4th, arrived today via USPS no hidden charges... Thanx OFT.

 

[snopro442]

Thumbs Up for OFTRACING, nothing but great service from them.

 

[hittoomanytrees]

I ordered the skid plate and relocator seperately. I had zero issues. I found both companies to be fast and offer great service and great quality parts.

I agree that the skid plate is a must.

 

[ViperTurboPete]

I got hit with a $34 customs charge on my last shipment from the US. Now I am hesitant about ordering more stuff. I wish I could order everything at the same time, but there isn't much money to go around after paying the ex.

 

[upei93]

I got hit with a $34 customs charge on my last shipment from the US. Now I am hesitant about ordering more stuff. I wish I could order everything at the same time, but there isn't much money to go around after paying the ex.

Make sure they ship USPS...

 

[ViperTurboPete]

My stuff was always shipped USPS. Still I get hit. Bad luck I guess.

 

[upei93]

My stuff was always shipped USPS. Still I get hit. Bad luck I guess.

Must have been GST and 5 dollar processing charge...I've been lucky this year.