Boston RX1
TY 4 Stroke Master
I just received my CSS unit. I can't believe how small and lightweight this is. If anyone would like pics, I will be glad to try my hand at taking them and putting them on this site.
DaveyBoy
TY 4 Stroke Guru
Dana would u please cause i cant seem to find a close up of them anywhere i am glad u like them.I am sure they are a good product and impact1 seems like a nice guy and has answered everyones ?`s i wish them the best and hope it will save on accidents out on trail 
Boston RX1
TY 4 Stroke Master
Mine was ordered and shipped yesterday.
While talking with Cindy at Impact, I mentioned that I witnessed an accident caused by an oncoming rider taking his hand off the bars to make "the signal" and she asked if I forward those details to help get out the word.
If anyone else has a story, please send Chris a message to help get the word out.
I'll be attending the Red Light Rally in Hurley, WI http://www.hurleywi.com/what_to_do/pg-red_light_rally.asp to show the CSS installed on my Apex GT and hopefully help spread the word.
I'll post installation pics as available.
While talking with Cindy at Impact, I mentioned that I witnessed an accident caused by an oncoming rider taking his hand off the bars to make "the signal" and she asked if I forward those details to help get out the word.
If anyone else has a story, please send Chris a message to help get the word out.
I'll be attending the Red Light Rally in Hurley, WI http://www.hurleywi.com/what_to_do/pg-red_light_rally.asp to show the CSS installed on my Apex GT and hopefully help spread the word.
I'll post installation pics as available.
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
Got mine, will install tomorrow, but will take pics when I get the painted panels back.
MOTOWN SPEEDFREEK
TY 4 Stroke Junkie
got my 2 yesterday,will install 1 today. 
MOTOWN SPEEDFREEK
TY 4 Stroke Junkie
SPEEDFREEK said:got my 2 yesterday,will install 1 today.
Installed both in under a hour
Every Ty member should have!!1 :ORC
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
Mine is installed, but I have no side panels yet, still at the paint shop.
I mounted it on the inside of the brake reservoir, pointing up and to the left above the brake reservoir. With the stock attak windshield, you can see it perfectly. BRIGHT AS H#$%!
wired into the accessory plg wires, cause it doesn't have power till the sled fires up. Ran the wire in the wire loom, and done.
I mounted it on the inside of the brake reservoir, pointing up and to the left above the brake reservoir. With the stock attak windshield, you can see it perfectly. BRIGHT AS H#$%!
wired into the accessory plg wires, cause it doesn't have power till the sled fires up. Ran the wire in the wire loom, and done.
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
DaveyBoy
TY 4 Stroke Guru
How is it mounted and to what can we havea close-up NICE BOTTLE ! 
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
Need a close up of the mounting kit, or where it's mounted on the handlebars?
No panels, so the bottle is in the open. Yep, it's got it!
No panels, so the bottle is in the open. Yep, it's got it!
DaveyBoy
TY 4 Stroke Guru
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
Didn't go back outside, but found this pic this morning while checking the forum. It is the same exact mount that comes with the kit, except for the clamp around the handlebar,........that is extra. It comes with 2 mounting points with 2 holes in each, like what is pictured mounted to his GPS unit. the center bolt has a turn handle, that brings the 2 pcs. of metal together around 2 ball joints covered in rubber.
Attachments
I don't know how I missed this post, but is it to late to get in on that discounted price??
- Joined
- Apr 14, 2003
- Messages
- 6,539
- Location
- Hessel, Michigan
- Country
- USA
- Snowmobile
- Sidewinder, SR Viper XTX, SR Viper XTX, 2016 Apex XTX and Pro-Line Pro Stock 1000
This is a good one, took the pictures last night, and today there is snow everywhere! Triler is sitting under 4 inches of the white stuff.
OOPS, My Bad for trampling on the thread, but yes, you should still be able to get the price, Right Chris?
OOPS, My Bad for trampling on the thread, but yes, you should still be able to get the price, Right Chris?
