Racing with Larry, N20 *VIDEO*

[2ooosrx]

Hey guys, there was a local event here that allowed nitrous sleds to race so we helped tune in RX1LARRY's RX1 with our nitrous system on it. We had some very solid runs near the end of the day and here is some footage I got from the day. Sled was running very solid. Here is the Video:

http://www.snowmobilefanatics.com/galle ... 2_4775.wmv

Let me know what you think.

 

[yamahajunkie]

very cool!!!!

 

[Black 1000]

I agree

 

[87gtNOS]

2000srx, how's that system gonna work at 20 below?

 

[Yamahammer485]

Thats a sick Vid!!!!

I burst out laughing so hard when that RX-1 ripped past the others in that one race!!!, that was so crazy!

 

[kinger]

2000srx, how's that system gonna work at 20 below?

Same as it does at an other temp, what type of question is that? There is a bottle heater that keeps the bottle warm. Performance may degrade a little if the heater cant keep up but who the heck is going to use it at -20 thats fricken cold to be doing 140mp on a lake!

 

[87gtNOS]

Kinger, my question is to not 'dis anyone. But that system looks like a strong runner on the grass at moderate temps....I am wondering how it's gonna perform after a day of trail riding...and yes, -20celsius, which is around -5f. That is not very cold where I live...and I would suppose that a day of riding in -10c to -15c is typical. So it is a very valid question from my standpoint.

 

[2ooosrx]

-20 n2o

It will perform just as good at -20C you must heat the bottle.
Bruce

 

[87gtNOS]

Re: -20 n2o

It will perform just as good at -20C you must heat the bottle.
Bruce

Right on!!

 

[RX1LARRY]

srx2000, I was viewing the video again and forgot to mention last time i spoke to you, the bearing was siezed on to the shaft when i changed it on the drive axle for the track. That thing had to be heating up and slowing us down at the end of the run!

 

[snowy1]

I don,t use a bottle heater and it still works just fine, bottle heater would help hold higher pressure but with the turbo, I don,t worry about it, if I want more I just put bigger nitrous jet in and turn up the boost.

 

[yamahajunkie]

larry are you running a stock primary, or a 4 tower? thanks junkie

 

[RX1LARRY]

stock primary

 

[jonnyturbo]

NOS

Larry any chance you could take a picture of where you mounted your nozzles and are you running a seperate fuel supply?

 

[RX1LARRY]

talk to bruce at cb performance he can hook you up with
what you need