Matthew457
Expert
Anyone use these ball joints from Royal Distributing? Wayyy cheaper than Yamaha’s, says they’re OEM replacement.
Stubbs
TY 4 Stroke Master
- Joined
- Nov 7, 2006
- Messages
- 1,110
- Age
- 43
- Location
- Uxbridge, On, Can.
- Country
- Canada
- Snowmobile
- ‘16 Apex XTX with 137” Mono II
+ other gooodies
- LOCATION
- Uxbridge ON
Replaced mine with those last year. Next time I’m at the cottage I’ll lift the front end and see how loose they are after 3500km ish of riding last year. The OE top joints wear very fast anyway, but the lowers are better. I’m just not sure they’re worth the $.
Matthew457
Expert
Oh that’s pretty good, I’m lucky if I put on 1500 km in a season, the ones I have on right now were on it when I bought it so they got minimum 8000 km on em, think it’s time to change lol, anything should be betterReplaced mine with those last year. Next time I’m at the cottage I’ll lift the front end and see how loose they are after 3500km ish of riding last year. The OE top joints wear very fast anyway, but the lowers are better. I’m just not sure they’re worth the $.
Gone Blue
VIP Member
- Joined
- Oct 11, 2006
- Messages
- 1,593
- Age
- 61
- Location
- Howell, Michigan
- Country
- USA
- Snowmobile
- 08' Nytro RTX 40th Anniversary - Stretched
IDK? I used SPI upper ball joints when I rebuilt my front end as they were way cheaper than the Yamaha ones. They only lasted 800 miles before developing play in them. I replaced them with the Yamaha ones and with over 2,000 miles on them they are still tight. G.B.
Similar threads
- Replies
- 4
- Views
- 779
- Replies
- 3
- Views
- 363
- Replies
- 4
- Views
- 2K