RX-1 done with Rider Forward (pic)

[tundra]

It'S wildchild who doing that kit. All came with the kit, really professional.

Since my computer was stolen this week, i did not have is mail.

It take approx 5 hour to do a clean job.

Southern, for the windshield, put the same black screw that hold the side pannel on the outside of the fairing by drilling a hole through the fairing and the windshield, and put a big washer inside to clamp the dasboard, the windshield and the fairing together. And forget about the side plastic at 80 $ each.

When you will run in deep powder, put Duct Tape by the inside of the hood to prevent snow to go on the Carb.

Every guy who respect himself should carry Duct Tape with him

 

[Rx1M5]

This is how I did mine. I modded the steering hoop. If you can weld aluminum its pretty staight forward (no pun intended)

 

[4strokes are better than2]

ted it makes your rx1 into apex style riding position moves your bars forward around 4 inches & puts you in a more natural riding position.the kit includes bolts new angled bushing & a new post made of cromoly & powder coated whatever color you want.you can get ahold of him on snowest forum his user name is wildchild.i will see if he dont mind me putting his email adress on here for guys to contact him.he also makes a-arms & some other light weight stuff for the rx & apex. here is some pics of the kit.

 

[AKrider]

Here's my Vector. I had t trim quite a bit off my cowling to allow it to clear the bars and brake lever when opening. Plus, the riser hit my guage so I temporarly relocated it to the top of my headlight pod.

I'm not pleased with the asthetics but it does make the sled better for stand up & agressive riding. Huge difference actually. I also have to run a low wind shield so that sucks a bit.