rx-1 midrange?

[jmp2204]

how well are they are supposed to pull from lower mid?i have a 97 sx700 and pulled my buddies(03 rx-1) hard 5-7 lengths from 30 mph-til i let off at about 80,my sled works about how it should .i would not call it exceptional.i have no studs(a 1'' lug track) he has 96 stock track.this is not what i expected to see.(conditions were hard pack)

 

[jmp2204]

doesn't anyone know how they should compare? ,what kind of rpm should it be running at?

 

[Bob Miller]

how well are they are supposed to pull from lower mid?i have a 97 sx700 and pulled my buddies(03 rx-1) hard 5-7 lengths from 30 mph-til i let off at about 80,my sled works about how it should .i would not call it exceptional.i have no studs(a 1'' lug track) he has 96 stock track.this is not what i expected to see.(conditions were hard pack)

His RX-1 is not running very well When the RX-1 first came out, we test drove one and compared it with my 99 700 V-Max that I had, and no matter how we lined them up, the RX-1 would always dust the 700

 

[mmmkokanee]

my rx1 mtn was quite a bit faster than my old 98 700 w/aaen pipes/clutching 1 1/2 track and smoked my buddys 97 700 clutched w/can(both yammies)and slowly pull away from an 03 viper 144 with bender pipes and clutching etc.
Didn't feel that fast till i had something to compare to.

 

[jmp2204]

thanks for the replies,i suspected he should have ran away from me.although he doesn't really care,i'm going to suggest we play with his clutching.really hate to see a yamaha not running to it's full potential!on top end he was gone but through the mid he fell back

 

[MOTOWN SPEEDFREEK]

should pull at 10200-10500 rpm.