camoman
Extreme
Picked up a 07 Attak this year , first 4 stroke and so far I LOVE it.
I was out boon dockin in some super deep snow on the weekend and heated up my belt and clutches real good (to the point the sled would not move). I let it kewl down a bit and then through on my spare belt. In doing this I noticed that my secondary clutch had a lot of standing rotation to it so much so I thought my chain was right loose. I checked my chain tension and it was fine, I adjusted it anyway but did not make a dif. When my sled is standing still and the belt is off I can rotate (loosly) my secondary clutch 2-3 inches either way without it trying to move the sled.
Is this normal?? Or is there somthing wrong?
I was out boon dockin in some super deep snow on the weekend and heated up my belt and clutches real good (to the point the sled would not move). I let it kewl down a bit and then through on my spare belt. In doing this I noticed that my secondary clutch had a lot of standing rotation to it so much so I thought my chain was right loose. I checked my chain tension and it was fine, I adjusted it anyway but did not make a dif. When my sled is standing still and the belt is off I can rotate (loosly) my secondary clutch 2-3 inches either way without it trying to move the sled.
Is this normal?? Or is there somthing wrong?
07 GT
Extreme
Thats normal. My 07 GT is the same way.
camoman
Extreme
Thanks bud! Just needed some re assurance as it rode fine the rest of the day.
Shootinstick
Expert
Normal for sleds with reverse chain case. If the slop wasn't there you would never get it into reverse.
