sneak peak at 2016 moleds in ontario!!

[yamamarc]

If anyone is interested in the 2016 models!!
http://snowsneakpeek.ca/

 

[Pstn head]

I'll be there

 

[yamamarc]

I'll be there

Barrie??

 

[ShootToThrill]

Check to see if we have more/better stud clearance with the new skids.

 

[KC]

Going to Kanata on Monday! Looking at spring order an vector xtx, only concern is no tip up rail! My 2011 apex xtx (19,000 km) is the best sled, I have owned, never had a issue with it, so I'm a little hesitate about vector.

 

[canadian nytro]

Why not the Apex KC?

 

[KC]

I don't really need the HP that the Apex has, so I thought I would go back to the vector. But I still not 100% sure yet, going to the sneak peak tomorrow and hopefully that will help me decide.

 

[greatwhite89]

Going to Kanata on Monday! Looking at spring order an vector xtx, only concern is no tip up rail! My 2011 apex xtx (19,000 km) is the best sled, I have owned, never had a issue with it, so I'm a little hesitate about vector.

Let me know what you think of Vector XTX at the snow show. If you have any pictures please share. I'm in the same boat as you, deciding between Vector and Apex. I don't want to be unsatisfied with Vector power. I currently have a 2015 Viper LTX-DX. Thanks!

 

[Grimm]

Check to see if we have more/better stud clearance with the new skids.

It looks like there is. Here's inside the tunnel of an Apex XTX:

 

[KC]

After going to the show, I decided not to replace my 2011 apex. I was going to spring order the Vector xtx, but the new suspension with the rear air shock, concerns me, because if the seal was to blow the sled would not be ride able. Plus with no tipped up rails, it looked long and it may push in tight trails. Hopefully I test drive a 2016 vector xtx and wait for the 2017 models. When it come down to it, no other sled (all brands) at the show impressed me more than my current sled.

 

[greatwhite89]

After going to the show, I decided not to replace my 2011 apex. I was going to spring order the Vector xtx, but the new suspension with the rear air shock, concerns me, because if the seal was to blow the sled would not be ride able. Plus with no tipped up rails, it looked long and it may push in tight trails. Hopefully I test drive a 2016 vector xtx and wait for the 2017 models. When it come down to it, no other sled (all brands) at the show impressed me more than my current sled.

thanks for the update. Didn't happen to take any pictures of the Vector XTX?

 

[KC]

No I did not take any pictures, forgot phone at home!

 

[cat hunter]

I was going to go to the show in Kanata but I been disappointed to many times!!!

 

[ShootToThrill]

It looks like there is. Here's inside the tunnel of an Apex XTX:

It does look a little better, thanks for the picture!!