andrew1984
Extreme
i read somewhere that the two together are a no-no.
anyone with first hand experience able to comment?
cheers
anyone with first hand experience able to comment?
cheers
KnappAttack
24X ISR World Drag Racing Champion
- Joined
- Feb 19, 2004
- Messages
- 4,695
- Location
- Welch MN
- Country
- USA
- Snowmobile
- 2023 Sidewinder LTX-LE
2017 Sidewinder LTX-LE
Ran SnoTrackers on my Attak with stock bar and they worked great, just railed around corners with no push or darting at all. I could feel the front end really rolling in the corners and thought perhaps it needed a stiffer bar to combat the roll. Installed the 13mm bar and that's when I noticed the pushing in the corners along with a stiffer ride up front side to side. Lost the railing effect with the stiff bar. Came home the same day and put the stock bar in and it railed corners again. It needed to roll some to put weight on the outside ski and transfer weight to it to corner well IMO.
andrew1984
Extreme
interesting, thanks for explaining it!
TBay Sledhead
TY 4 Stroke Master
- Joined
- Jan 16, 2005
- Messages
- 1,129
- Age
- 73
- Location
- Thunder Bay, Ontario.Ca
- Country
- Canada
- Snowmobile
- 06 Attak
01 SXR Long Track
I run the snow trackers and the 13 mm bar and find that it works great.
sledheadgeorge
TY 4 Stroke God
TBay Sledhead said:I run the snow trackers and the 13 mm bar and find that it works great.
X2
YAttak07
Extreme
Sno-trackers and stock bar = AWESOME.......!
779cookies
Lifetime Member
Aggressive trackers on pilots and 13mm, love it!!
ryama
Expert
- Joined
- Mar 3, 2009
- Messages
- 209
- Location
- Kitchener Ontario
- Country
- Canada
- Snowmobile
- Sidewinder R-TX
- LOCATION
- Kitchener
13mm
Trackers and 13mm here. And it ROCKS!!!
Trackers and 13mm here. And it ROCKS!!!
northernguy10
Extreme
snow-trackers and 13mm is the only way to go!!!
Panterawill
Extreme
- Joined
- Oct 5, 2011
- Messages
- 89
YAttak07 said:Sno-trackers and stock bar = AWESOME.......!
X2
sx7001
TY 4 Stroke Junkie
- Joined
- Jun 28, 2003
- Messages
- 693
- Country
- Canada
- Snowmobile
- Sidewinder
KnappAttack said:Ran SnoTrackers on my Attak with stock bar and they worked great, just railed around corners with no push or darting at all. I could feel the front end really rolling in the corners and thought perhaps it needed a stiffer bar to combat the roll. Installed the 13mm bar and that's when I noticed the pushing in the corners along with a stiffer ride up front side to side. Lost the railing effect with the stiff bar. Came home the same day and put the stock bar in and it railed corners again. It needed to roll some to put weight on the outside ski and transfer weight to it to corner well IMO.
IMO, your older and slower these days. Hows that DOO DOO with the P/B clutch working for ya? Any new world records?
KnappAttack
24X ISR World Drag Racing Champion
- Joined
- Feb 19, 2004
- Messages
- 4,695
- Location
- Welch MN
- Country
- USA
- Snowmobile
- 2023 Sidewinder LTX-LE
2017 Sidewinder LTX-LE
sx7001 said:KnappAttack said:Ran SnoTrackers on my Attak with stock bar and they worked great, just railed around corners with no push or darting at all. I could feel the front end really rolling in the corners and thought perhaps it needed a stiffer bar to combat the roll. Installed the 13mm bar and that's when I noticed the pushing in the corners along with a stiffer ride up front side to side. Lost the railing effect with the stiff bar. Came home the same day and put the stock bar in and it railed corners again. It needed to roll some to put weight on the outside ski and transfer weight to it to corner well IMO.
IMO, your older and slower these days. Hows that DOO DOO with the P/B clutch working for ya? Any new world records?
Working great! Outruns the 2011 Apex I ride with! Try as we might, we just can't make the Apex outrun the little Doo anymore since the header and PB80. Added Ulmers airbox mod and PC5 to no avail on the Apex, also tried gearing down with no gain.
Did get beat by my buds CFR800 this year though after he did some more clutching. I'll fix that for next season, only need another 3 lengths! RB3 and narrower lighter track should give me that easily, just giving up too much to him using a 16" wide, 137" long track. Not bad for a 130 HP sled I'd say. LOL!
sx7001
TY 4 Stroke Junkie
- Joined
- Jun 28, 2003
- Messages
- 693
- Country
- Canada
- Snowmobile
- Sidewinder
Lots of fast Yammy's up here. Bring that bad boy of yours up to one of our local gun runs. The lake is 10 miles long, I'll give you a 5 mile head start LoL.
KnappAttack said:Ran SnoTrackers on my Attak with stock bar and they worked great, just railed around corners with no push or darting at all. I could feel the front end really rolling in the corners and thought perhaps it needed a stiffer bar to combat the roll. Installed the 13mm bar and that's when I noticed the pushing in the corners along with a stiffer ride up front side to side. Lost the railing effect with the stiff bar. Came home the same day and put the stock bar in and it railed corners again. It needed to roll some to put weight on the outside ski and transfer weight to it to corner well IMO.
ABSOLUTELY IMO
KnappAttack
24X ISR World Drag Racing Champion
- Joined
- Feb 19, 2004
- Messages
- 4,695
- Location
- Welch MN
- Country
- USA
- Snowmobile
- 2023 Sidewinder LTX-LE
2017 Sidewinder LTX-LE
sx7001 said:Lots of fast Yammy's up here. Bring that bad boy of yours up to one of our local gun runs. The lake is 10 miles long, I'll give you a 5 mile head start LoL.
Bring yours down, lots of fast guys here too. You forget I ride with a bunch of drag racers and speed runners, and I'm talking ISR world class drag racers, Hayday champs and speed record holders! None of this backyard/local stuff. Perhaps you remember too, I had a 2011 Apex and about 20 older versions of the Apex/RX-1.
Similar threads
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.