Is there a place to keep a spare belt on a Phaser
- Joined
- Apr 17, 2003
- Messages
- 5,347
- Location
- Menno, SD
- Website
- www.ulmerracing.com
- Country
- USA
- Snowmobile
- 2014 Yamaha SR Viper LTX, 2014 Yamaha SR Viper RTX SE, 2015 Yamaha SR Viper MTX SE 162 (turbo), 2015 Yamaha SR Viper MTX SE 153
- LOCATION
- Menno, SD
- WEBSITE
- www.ulmerracing.com
In the plastic trunk on the back of the tunnel.
Srxspec said:
Thanks, I didn't think there would be room for a belt in there
GypsyRoots said:You can also get an accessory bag that goes in the front.
Between the front suspension above the "beam"...
I heard some people are heving good luck with those (not getting totally iced over)...
I've had no problem with my belt/tool bag after 300 miles this weekend.
My tool bag was totally covered with ice after riding in powder. Wont be fun to get the belt and tools out.
phazerboost
Pro
I took the tool box off of the tunnel and the sled looks awsome. I stuff my belt in with the shovel scoop in my HMK back pack and put my tools inside.
rfabro
TY 4 Stroke Junkie
How's your sled treating you, phazerboost?
phazerboost
Pro
I have had some problems with it but when it runs good it runs really good. Most of the issues come from riding in deep snow. I replaced the muffler with a strait through one and that helped but now I have to relocate the air filter to keep the snow off of it. I think that it is too close to the exhaust and turbo and it is warm enough that the snow melts when it hits the filter. I am going to put it behind the turbo and hopefully it will stay cool enough that the snow will fall off of the snow filter instead of melting and going through it. I also replaced all of the hose clamps with stainless t-bar clamps because the ones that come with the kit are weak enough that I can strip them with a nut driver.
