spindle bushing - replacable???

[Mills]

I am replacing the stock skis with Tuners but, when I went to pull everything apart the collars that go through the spindles that the ski bolt goes through were stuck in each spindle. I had to use a press to get them out. After cleaning everything up the collar is now slightly sloppy inside the spindle. I notice there are some brass or oil-lite bushing inside the spindles. Can they be replaced? I dont see them on the parts diagram?
Also, what is the nominal diameter of the collar that goes through the spindle? Maybe it is now undersized which is causing the sloppiness.

 

[Yamadooed]

90384-16N51-00 Bi Metal bushings two per spindle.

 

[herndonp]

Yes I replaced mine after 2500 miles.

 

[canoehead]

http://www.ty4stroke.com/threads/phazer-riders-check-spindle-ovaling-where-ski-mounts.84758/

 

[Sevey]

Just need to press them out.
MS

 

[mnman309]

Ulmer sells them too

 

[porkchop]

My '09 RTX has just over 1k miles- spindle bushings shot.
Went with Ulmer's, $35 + 2 new stock collars slathered in never seize

 

[erick jr charbonneau]

Hey there i dont fine nothing ulmers ??
Tanks guys