Subframe and grizz

[Dynomax666]

Does grizz still do the gusset kits haven't seen a lot of recent posts. Does he straighten and weld it up? Or just sell the kits? Im Not risking this getting bent again.

 

[Keith1962]

Send him an email. grizztracks@gmail.com

 

[Gone Blue]

Grizz just sells the kit. With the sled sitting on the garage floor on the skis, I used a 3 plus foot crowbar to straighten my tweaked subframe. Then tore it down to weld in Grizz's kit.

 

[grizztracks]

I'm still around if you need help with the subframe. grizztracks@gmail.com

 

[1nc 2000]

I'm still around if you need help with the subframe. grizztracks@gmail.com

I need a gusset kit.
I'll email you.
Tim

 

[1nc 2000]

Hooked a carbide last spring...
Going about 10mph across tracks.

 

[1nc 2000]

Installed my gusset kit after straightening the subframe.
Thanks grizz!
Check out this lower ball joint that got bent.
A arms did not bend.
Sub frame is super strong now.

 

[Gone Blue]

Installed my gusset kit after straightening the subframe.
Thanks grizz!
Check out this lower ball joint that got bent.
A arms did not bend.
Sub frame is super strong now.
View attachment 174542

1nc 2000, that is bad azz! I installed Grizz's reinforcement kit 4,000 plus miles ago and I knew once welded, it would be stout! G.B.

 

[1nc 2000]

New ball joint on the way from speedway motors and should be ready to go soon.