weight transfer needed

[bottlefed]

i have an 04 rx-1 short track and i have what seems to be no weight transfer. I even rode 2 up (aprox. 415 pds) and i could still spin the track at will. That is running stock with 144 studs. Any help on what to adjust would be appreciated.

 

[pro116]

did you try adjusting your transfer rods?
You could loosen up your limiter straps a little bit

 

[bottlefed]

i have not adjusted the transfer rods yet. do you have to lenghten them to get more transfer. and on the straps what do you suggest something like 1/4 in.

 

[bottlefed]

i have not adjusted the transfer rods yet. do you have to lenghten them to get more transfer. and on the straps what do you suggest something like 1/4 in.

 

[pro116]

I would adjust the rods first and see how you like it.You have to move the nuts up so there is more of a gap where it bottoms out it allows the rods to come down further.

 

[Fullback]

The bottom line is that the stock skid doesn't transfer well. I've got a cat skid and there is no comparison to the hook up.

 

[rx-1 blue reverse]

Transfer bars

more lines= less xfer

 

[bottlefed]

thanks for the tips when I get it back together I will do some adjustments and see what works.

 

[bottlefed]

thanks for the tips when I get it back together I will do some adjustments and see what works.