snopro442
VIP Member
- Joined
- Dec 10, 2007
- Messages
- 320
- Reaction score
- 13
- Points
- 1,013
- Location
- neenah wi.
- Country
- USA
- Snowmobile
- mod 08 nytro, 2-2007 phazers and a 2010 sno pro 500 speedwerx exterminator. new 2014 nytro for towing the snowcoach. 2015 Viper mpi turbo
i have 3 07 phazers, one has a polaris 1 3/4 lug track part number 5412570 121x14 i priced a new one and they are around 500.00, need to know the pitch of the phazer and what other tracks would work. any help would be great thanks
terret725
TY 4 Stroke Junkie
i just put that track on my plazer. fits perfect. there is also the free ride, i think its name is. also kimpex makes a 14 wide track too. most new tracks other then the new doos are all the same pitch. alsong as they are 121 they will fit. even a cat 128x13.5 will fit if u put rail extentions on and take the out side wheels off
I think the pitch is 2.52.
Todd, the pitch is 2.52. The only tracks I know of that will fit the Phazer skid is the 04 Pro-X-r track and the free ride. Frank.
Take any 2.52 pitch track and cut it down to 14.5.
snopro442
VIP Member
- Joined
- Dec 10, 2007
- Messages
- 320
- Reaction score
- 13
- Points
- 1,013
- Location
- neenah wi.
- Country
- USA
- Snowmobile
- mod 08 nytro, 2-2007 phazers and a 2010 sno pro 500 speedwerx exterminator. new 2014 nytro for towing the snowcoach. 2015 Viper mpi turbo
found some new 121x14x1.5 tracks and started to install them, will post pics soon of all 3
akquad12
Newbie
- Joined
- Aug 20, 2007
- Messages
- 19
- Reaction score
- 0
- Points
- 281
Do you have to remove the heat exchanger guard to run a 1.75 in lug track?
No lot of room.Is no guard on them.
i put a cut down polaris 1.75 x 136 and had zero problems....just trying to get clutching straightened out....
I sent you a mesage on your clutch.
biffdotorg
VIP Member
- Joined
- Dec 2, 2008
- Messages
- 2,211
- Reaction score
- 1,126
- Points
- 1,583
- Location
- Pelican Rapids, MN
- Website
- www.biff.org
- Country
- USA
- Snowmobile
- Apex XTX and Viper LTX SE
- WEBSITE
- www.biff.org
Well, I took my first ride last night on my Phazer FX with the Camoplast Freeride installed.
WOW!
We have 10-15" of new snow here in ND/MN and the drifts are measured in feet. (that's not common for us) So the new track performed very well in this deep snow. The floatation and hook up were a huge improvement.
What I did like was how well it performed on the groomed trail as well. The only issue I had was the ability to keep the headlight on the trail, it was always pointing towards the sky!!!
Combine the new track with the tunnel closure and low-snow wheels, this sled is ready for it all.
Good luck!
Thanks iRace for the great deal on the freeride!
Mark Lawson
Fargo
WOW!
We have 10-15" of new snow here in ND/MN and the drifts are measured in feet. (that's not common for us) So the new track performed very well in this deep snow. The floatation and hook up were a huge improvement.
What I did like was how well it performed on the groomed trail as well. The only issue I had was the ability to keep the headlight on the trail, it was always pointing towards the sky!!!
Combine the new track with the tunnel closure and low-snow wheels, this sled is ready for it all.
Good luck!
Thanks iRace for the great deal on the freeride!
Mark Lawson
Fargo
Weapon X
TY 4 Stroke Junkie
good to know biff I'm installing that track right now , along with ulmer clutch kit
Similar threads
