What gearing are you running with your yamacharger

[mr.pitstop]

What are you guys with the yamachargers running for gearing. I was considering upping my top gear to a 25 tooth but I think I'll leave it stock. I'm about 300lbs fully dressed and when I had my turbo rx-1 on low boost (around 4lbs) I tried a 25 and I lost too much mid range and it took the entire lake to wind it out. I ended up switching back to the 24 and liked it alot better. With the yamacharger I'll only be running 2 lbs of boost so Im thinking stock gearing will be good for me. Whats everyone else think..

 

[MUSKIE]

24 top for me

 

[mr.pitstop]

24 top for me

Thanks MUSKIE. I think thats what mine is stock (06 RTX) So thats what I'll have too. I think it will be sufficient for 2lbs boost

 

[spddmon]

i ran 122.5 on 24/38 gearing 06 apex rtx with reverse and super charger the gearing was a bit short with the yamcharger stock gearing is fairly safe

 

[spddmon]

i ran 122.5 on 24/38 gearing 06 apex rtx with reverse and super charger the gearing was a bit short with the yamcharger stock gearing is fairly safe

 

[mr.pitstop]

Whats stock on the 06 RTX 24/40??

 

[attakmod]

23 top for me (stock) but Iam running a 1.5" lug track.

 

[SledFreak]

23/38 would be my Guess for trail.... Maybe 24/38 if you are on ice.....

 

[mr.pitstop]

24/38 is stock for my 06... I think I'll leave it alone for the yamacharger and just clutch it.

 

[ScottyD]

i was going to leave the 22/38 in mine to try to see how it would work with the yamacharger, then try 23/38