TurboJamie
TY 4 Stroke God
Long story short I lost my drive axle and drivers out the back of my pickup truck the other night, and had already pressed on my internal drivers.
I have a new axle sitting here and drivers BUT with no old axle and center between the drives I don't know where to press my new drivers on to.
If anyone has the axle out of their sled can you measure for me from the chain case side to dead center of your center drivers. It is not centered on the shaft but offset.
I have a new axle sitting here and drivers BUT with no old axle and center between the drives I don't know where to press my new drivers on to.
If anyone has the axle out of their sled can you measure for me from the chain case side to dead center of your center drivers. It is not centered on the shaft but offset.
rightarm
TY 4 Stroke Master
Can't help you out with the measurement, but I am sorry to hear that happened.BLNT
sledheadgeorge
TY 4 Stroke God
- Joined
- Apr 28, 2003
- Messages
- 1,629
- Reaction score
- 55
- Points
- 1,008
- Location
- Ontario
- Country
- Canada
- Snowmobile
- Which one? I have 6
TurboJamie said:
Let me know what back roads in the Stouville area you were bombing around and I will keep an eye for it. I'm up in that area 2-3 times a week.
08NitroRTX
VIP Member
Sorry no help here either BUT the real question is HOW much was the replacement axle?
Mr. Pump Gas
Extreme
I would contact Allen @ Ulmer I know he has had the stock ones out.
TurboJamie
TY 4 Stroke God
All done and fixed guys I got the measurements from the manual and figured it out. Axle was 90 bucks I beleive.
