What rear cooler?

[billbies]

I've been reading up and on my 07 attak I want to add the rear cooler but what rear cooler is everyone using
And any write ups on how to do it

thanks

 

[WinderFab]

Billbies we got ours at pioneer performance comes with instructions, fairly easy to do and we'll worth it...

 

[sideshowBob]

Here's what I installed on my Attak

8FT-124A0-00-00

This is the part number for the Yamaha Attak cooler kit.

 

[billbies]

^ so they have like an accessory part number for it ?

 

[steiner]

Pioneer Perf has a kit and also sells the proper protectors as well.
Found here http://pioneerperformance.net/store/page12.html

Port Yamaha also sells the kit that was mentioned above
http://www.ty4stroke.com/viewtopic.php? ... tak+cooler

 

[CaptCaper]

Is your track studded? if so you'll need 1 1/2 inches of protection on these machine made up over the cooler to prevent the studs from ripping open the cooler.

 

[sideshowBob]

^ so they have like an accessory part number for it ?

Yes comes as a kit

 

[billbies]

^ r u studded if so what did u use as protectors

 

[CaptCaper]

I'm studded with Woody's 1.325 Gold diggers. Got 1000 miles on them. You make protectors out of Aluminum 1 in sq stock from Home Depot. And I added Hyfax over to get the 1 1/2 in. I'm not the only one here that has built them. Some have built them with only 1 in clearance and hit the cooler. This is what we've learned on these machines.
Here a a couple of pictures of protectors made. Again if studded you have to get a total of 1 1/2 in protection over the cooler then taper down to nothing behind the upper wheels.