What's everyone doing for mods over the summer??

[razor_220]

Hey guys! Think I will be doing:

-skinz a-arms
-mountaintech shorty skid plate
-heavier torsion springs

On my 2009 nytro xtx!

 

[sorenson1610]

I clipped a stock ripsaw, use a utility knife to cut open the closed windows and clip it. Pretty easy, just make sure its sharp and take your time.

Upgrades:

Exit x1 skid shocks
Exit x1 front shocks or Evol upgrade to my floats...Haven't decided yet
Ulmer clutch kit
New RSI gelwrap for the handgrips
Some powder coating
Normal maintenance items

 

[mcamzr]

He likely meant the windows, as some tracks only have every 3rd cut out.

That's what I ment.

 

[newfie09xtx]

Thinking about:
-Star Suspension kit
-Block off plate
-Seat Jack
-some powdercoating

 

[snoway]

If i don't get a decent trade-in for the nytro towards a viper, i will look strongly at the skinz front end and go against the concensus on here and give the BDX steering relocate a shot.

 

[timebomb]

For my 11' Nytro

Red hand guards
White skid plate
Red shock covers
Red snowflap
96 gold diggers w/ red backers
Red c&a skis
2" pivot riser
Some kind of storage, maybe windshield bag or handlebar bag or something

 

[Dodge Ram]

Ahhh got it. I will clip those that allow. I have at this time 4 left on the track. So I will go from there. If the stock track will allow me to clip it completely then I will. If not then every third. Better than what I have now.

 

[sorenson1610]

Ahhh got it. I will clip those that allow. I have at this time 4 left on the track. So I will go from there. If the stock track will allow me to clip it completely then I will. If not then every third. Better than what I have now.

It already should be clipped every third, just use a utility knife to cut open the rest. Then you can clip it fully.

 

[AnythingButLast]

1.) 128" extension w/ 1.25" 2 ply ripsaw
2.) 238 studs 1.450" with black angled double and single plastic backers
3.) JRE proto 3 spindles
4.) Avid 9 tooth extrovert drivers
5.) Powdercoating bumper, a arms flat black
6.) Sledstart Remote Start
7.) Repolishing Tunnel
8.) Custom hydrographics if budget allows before November
9.) 4th rear wheel kit & additional excell wheels

That should keep me busy and broke for the better part of this summer

 

[sorenson1610]

Ahhh got it. I will clip those that allow. I have at this time 4 left on the track. So I will go from there. If the stock track will allow me to clip it completely then I will. If not then every third. Better than what I have now.

It already should be clipped every third, just use a utility knife to cut open the rest. Then you can clip it fully.

 

[mcamzr]

For my 11' Nytro

Red hand guards
White skid plate
Red shock covers
Red snowflap
96 gold diggers w/ red backers
Red c&a skis
2" pivot riser
Some kind of storage, maybe windshield bag or handlebar bag or something

I have a windshield bag if you want it. But it doesn't hold much.

 

[radianguy]

-Air box mod
-PCV w/auto tune
-A few more things to powder coat
-Thinking about OFT relocator?

 

[Dodge Ram]

Ahhh got it. I will clip those that allow. I have at this time 4 left on the track. So I will go from there. If the stock track will allow me to clip it completely then I will. If not then every third. Better than what I have now.

It already should be clipped every third, just use a utility knife to cut open the rest. Then you can clip it fully.

Got it. Will probably look into that.
Oh, I foregot to add I have to do bushings up front.

Some work on the wife's Polaris Pro R Rush also. PM stuff and grill guard.

 

[mcamzr]

And I will be adding a sno-x style longer snow flap.

 

[Tyloooor]

-128 star kit with 1.25" track (haven't made up my mind yet on which track)
-hurricane performance kit with clutch kit....making power babe!
- thinking about blacking out my tunnel...
- fixing my bent subframe
- painting/powder coating my a-arms....
-new white sliders
-new drive bearings