Xl semi-rigid tunnel bag install

[hognit09]

The directions aren’t the best and maybe I’m a little stupid but got the hardware on and I can’t get the locking caps to turn on the cams. Do I have this installed right ?

 

[WinderFab]

Even though my sled came with the medium bag, my cams were mounted to the tunnel without the washers in between.

 

[hognit09]

I wonder what those are for, the cam lock fits right in there

 

[WinderFab]

I could be 100% wrong but It doesn’t seem right having the washers on top on the tunnel..

 

[hognit09]

With the protectors that are under the tunnel they won’t fit there

 

[yamaha06]

With the protectors that are under the tunnel they won’t fit there

Did you end up not using those big washers? When I installed mine I never used them since the instructions didn’t mention anything about them. I wasn’t sure what they were used for.

 

[twyztid]

I don't use the quick release cams the way they were intended. I locked the 2 pieces together and then bolted those through the tunnel with a fender washer, stainless screws, and lock nuts so that there was no way it could come off by accident. I also have the XL bag and cutoff the extra straps that they have on the sides toward the front.