xtx track

2013fxnytroxtx91 said:
What ply is a 2013 fx nytro xtx 1.25 track?

I know my 2013 Nytro fx 120in is a 2.86 pitch single ply.
I would be surprised if Yamaha didn't use the same extroverts/axle etc in building both sleds so it's likely a 2.86p track?? These tracks are usually single ply.

I had a hard time getting absolute confirmation on whether my track was single ply vs 2 ply but it is def single ply....I owuld prefer it 2 ply frankly....have to run much more expensive studs/backers and I am not overly confident in single ply durability...but that remains to be seen...this was more from a studded point of view as I ride on very tough conditions and am studded....will take a couple extra lbs and rotational resistance tradeoff for durability any day for my application.....
 
It is a 2ply track. All 2009-2013 nytro xtxs with the 1.25" lug ripsaw track have a 2ply track. That track is a 2.52" pitch and is 144" long.

The only trail sleds yamaha has produced with a single ply track are the 2012-2013 nytro rtx and the 2013-2014 std. nytro which both used a 2.86" pitch 120" long single ply ripsaw 2 track.

2013fxnytroxtx91 said:
What ply is a 2013 fx nytro xtx 1.25 track?
 


Back
Top