Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.
the nytro track is a 3.0 pitch and the phazer is a 2.52, so yes you will need new drivers 7 tooth 3.0 pitch drivers and the rails wont just bolt up it would be cheaper and easier to just get rail extensions. The track will have to be cut down 14.5 is as wide as you can go. If your going to buy a...
Which one is better? I know a few thing about each I would like to know your opinon of which one is better and why, And which one would have better throttle response. Thanks,
Ok you re used your clamps, When I had mine tore apart last year one of the clamps was loose also, I guess its a good Idea to check them once in a while. Thanks for posting the pic.
^ Did you install new clamps or did you weld in the mcx flex joints?
And where the exhaust cracked by the hanger was it caused by the bolt
being loose?
1. let the limiter strap out
2. decrease the the spring preload on the front shock of the rear
suspension.
3. Decrease the spring preload on the front shocks.
4. different skis
Buy from Lepnhimer in Montana, Mark is a good person to deal with.
Basicly you just need the turbo kit, boost guage and some clutch pieces, you will have to plug the hole in the rear of the tunnel if its a 07 model, And you should reroute your airfilter out the back. Mark can set you up with...
you can replace the jackshafts/gearbox with a solid jackshaft from a standard 07 phazer, its a $135.00 part I dont know what you do with the wiring any ideas?
Can you remove the reverse gearbox? I thought I heard of people doing this. And yes the blocks are weak on these motors but it takes alot of boost with a head shim are low compression pistons to make them fail, I was told anything over 20 pds with rods and pistons installed would eventually fail...
What was wrong with the stock box? What would the sled run like when the stock map wasnt working right? I run a power commander on top of my mcxpress kit and it works good. You can adjust the low mid and high fuel settings.
I wont be able to ride my sled till january, Im in Alaska and the sled is in Oregon. When I do I tell ya how it works, Anything is better than the stock setup it would bottom out on a 6 inch hole and I only weigh 145 lbs.
Many run this suspension on there nytro and apex mtn's and it is night...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.