Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.
IACV will click when it bottoms out - its normal. You'll hear it move for a second or two, and then click once bottomed in the seat. You could have a clutching issue not letting it disengage and stalling out the sled.
One of the best mods I've made to my nytro. Send Robert your center shock while your at it, so the linkage cant invert when your limiter straps break (cost me a fortune and my seld trip years ago - I made a thread here years ago about it). Next best mod would be the vector gauge and handwarmers.
2008 had no bottom plate with the hole in it and had different geometry.
2009+ are all the same and have the plate with hole , a large plate at the rear, and some gussets.
Grizztrack kit is easy to spot.
After 19,000km my stock seat seems too soft and low.
Especially after trading up with some friends Vipers.
Anyone have one and want to sell? I'm in Ontario, shipping could work.
thanks guys, I got a set a sheaves in good shape off another nytro and going to machine them.
That's a good point about the spider, you can see the nytro one has clearance pockets and the 2 smoker doesn't.
you could probably get away with using the 2 stroke sheaves and ntyro spider.
Hard to believe I started this thread 6 years ago, and it's still getting attention!
As of lately everyone seems to think the rattle is from the roller bolts. But this is only one source. Easily eliminated with a o-ring under the nut.
The other source is from the plastic spider paws, and the...
The clutch sheaves on my nytro are shot after 18000km.
I have a good condition vmax 700 clutch, looking at the fixed sheaves they similar, but you can see the moving sheave has been beefed up at the webbing/gussets on the nytro.
Curious to know if anyone's used a 2 stoke clutch with success...
I've read that you've machined your primary for Overdrive. My Nytro just rolled over 15000km, and I plan to do some clutch work and install 2 speed turk setup. When you machine for overdrive do you only machine the bottom faces of the clutch sheaves, or have you changed the angle at all? Cheers
I switched to tuners, was using a 6" square, and 2" round setup. The star xtx made a big difference too - allowing it to transfer gets the front end lighter. I had no relocator until this year, and I'd say effort was medium to high after riding some '15 and '16 vipers.
I did a custom...
I'm curious to know if anyone has put a heated seat element in their Nytro seat.
I've been debating it, and you can get the generic kits online for real cheap. The wiring is no issue for me.
Cheers,
I've had the kit for 4 years now (i think)...my sag is maybe a inch or two (rear bumper) when playing with it in the shop.
Before it was 4-5". Make sure the skid is fully greased, the springs and linkage are still responsible for pulling it back up.
You have some resistance somewhere.
Kit is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.